Loading ...
Loading ...
Loading ...
(69,1)
北米Model "A1525BE-A" EDITED: 2023/ 4/ 24
2. Place the booster seat/cushion in the
rear seating position and sit the child
on it. The child should sit well back on
the booster seat/cushion.
3. Run the lap and shoulder belt through
or around the booster seat/cushion
and the child following the instructions
provided by its manufacturer. For
booster seat/cushion with a belt guide,
use the seatbelt through the belt guide.
4. Insert the tongue plate into the buckle
until you hear a click. Take care not to
twist the seatbelt.
Make sure the shoulder belt is posi-
tioned across the center of child’s
shoulder and that the lap belt is
positioned as low as possible on the
child’s hips.
5. To remove the booster seat/cushion,
press the release button on the seat-
belt buckle and allow the belt to retract.
WARNING
. Never use a belt that is twisted or
reversed. In an accident, this can
increase the risk or severity of
injury to the child.
. Never place the shoulder belt
under the child’s arm or behind
the child’s back. If an accident
occurs, this can increase the risk
or severity of injury to the child.
. The seatbelt should fit snugly in
order to provide full restraint.
Loose fitting belts are not as
effective in preventing or redu-
cing injury.
. Place the lap belt as low as
possible on the child’s hips. A
high-positioned lap belt will in-
crease the risk of sliding under
the lap belt and of the lap belt
sliding up over the abdomen, and
both can result in serious injury
or death.
. Make sure the shoulder belt is
positioned across the center of
child’s shoulder. Placing the
shoulder belt over the neck may
result in neck injury during sud-
den braking or in a collision.
– CONTINUED –
Child Restraint Systems
67
1
Seat, Seatbelt and SRS Airbags
Loading ...
Loading ...
Loading ...