Loading ...
Loading ...
Loading ...
(154,1)
北米Model "A1525BE-A" EDITED: 2023/ 4/ 24
locked. When this occurs, press the
push-button ignition switch while
turning the steering wheel left and
right.
! Battery drainage reduction function
s03bg0201
When the push-button ignition switch is left
in the “ACC” position for approximately 20
minutes or the “ON” position (the engine is
not running) for approximately 1 hour, the
push-button ignition switch will be auto-
matically switched to “OFF” to reduce the
possibility of the battery going dead. (This
function is activated when the select lever
is in the “P” position.)
& When Access Key Fob Does
Not Operate Properly
s03bg03
Refer to “Access Key Fob – If Access Key
Fob Does Not Operate Properly” �P441.
3-3. Hazard Warning Flasher
s03ab
The hazard warning flasher is used to warn
other drivers when you have to park your
vehicle under emergency conditions. The
hazard warning flasher works with the
ignition switch in any position.
To turn on the hazard warning flasher,
press the hazard warning flasher switch on
the instrument panel. All the turn signal
lights and the turn signal indicator lights
will flash. To turn off the flasher, press the
switch again.
NOTE
When the hazard warning flasher is on,
the turn signals do not work.
3-4. Meters and Gauges
s03ad
NOTE
Liquid crystal displays are used in
some of the meters and gauges in the
combination meter. You will find their
indications hard to see if you wear
polarized glasses.
& Speedometer
s03ad03
The speedometer shows the vehicle
speed.
NOTE
The initial movement of the meter
needles and gauge needles that occurs
when the ignition switch is turned to the
“ON” position can be activated or
deactivated.
For details, refer to “General settings”
�P198 (11.6-inch display models) or
“General settings” �P215 (dual 7.0-
inch display models).
Hazard Warning Flasher
152
Loading ...
Loading ...
Loading ...