Loading ...
Loading ...
Loading ...
(50,1)
北米Model "A1525BE-A" EDITED: 2023/ 4/ 24
3. After drawing out the seatbelt, pass it
through the belt guide as follows: First
insert one edge of the belt into the open
gap in the belt guide; then slide the rest
of the belt in, so that the whole belt fits
inside.
4. Make sure that the “ ” mark on the
anchor tongue plate and the “
” mark
on the anchor buckle face outwards.
5. After confirming that the webbing is not
twisted, insert the anchor tongue plate
attached at the webbing end into the
buckle on the right-hand side until a
click is heard.
. If the belt stops before reaching the
buckle, return the belt slightly and
pull it out more slowly.
. If the belt still cannot be unlocked, let
the belt retract slightly after giving it a
strong pull, then pull it out slowly
again.
6. Insert the center seatbelt tongue plate
into the center seatbelt buckle until it
clicks.
7. To make the lap part tight, pull up on
the shoulder belt. And place the lap
belt as low as possible on your hips,
Seatbelts
48
Loading ...
Loading ...
Loading ...