Loading ...
Loading ...
Loading ...
(451,1)
北米Model "A1525BE-A" EDITED: 2023/ 4/ 24
CAUTION
. Be careful not to damage brake
hoses, sensor harnesses, and
other parts when washing sus-
pension components.
. Be careful not to flush the engine
bottom for a long time. It may
cause damage of some electrical
parts.
! Using a warm water washer
s10aa0102
. Keep a good distance of 12 in (30 cm)
or more between the washer nozzle
and the vehicle.
. Do not wash the same area continu-
ously.
. If a stain will not come out easily, wash
by hand. Some warm water washers
are of the high temperature, high
pressure type, and they can damage
or deform the resin parts such as
mouldings, or cause water to leak into
the vehicle.
& Waxing and Polishing
s10aa02
Always wash and dry the vehicle before
waxing and polishing.
Use a good quality polish and wax and
apply them according to the manufac-
turer’s instructions. Wax or polish when
the painted surface is cool.
Be sure to polish and wax the chrome trim,
as well as the painted surfaces. Loss of
wax on a painted surface leads to loss of
the original luster and also quickens the
deterioration of the surface. It is recom-
mended that a coat of wax be applied at
least once a month, or whenever the
surface no longer repels water.
If the appearance of the paint has dimin-
ished to the point where the luster or tone
cannot be restored, lightly polish the sur-
face with a fine-grained compound. Never
polish just the affected area, but include
the surrounding area as well. Always
polish in only one direction. A No. 2000
grain compound is recommended. Never
use a coarse-grained compound. Coarser
grained compounds have a smaller grain-
size number and could damage the paint.
After polishing with a compound, coat with
wax to restore the original luster. Frequent
polishing with a compound or an incorrect
polishing technique will result in removing
the paint layer and exposing the under-
coat. When in doubt, it is always best to
contact your SUBARU dealer or an auto
paint specialist.
CAUTION
Do not use any agents with organic
solvents on the surface of the bulb
assembly cover. However, if a polish
or wax with organic solvents is
applied to the cover surface, com-
pletely wipe off the polish or wax.
Otherwise, the cover surface may be
damaged.
NOTE
Be careful not to block the windshield
washer nozzles with wax when waxing
the vehicle.
& Cleaning Alloy Wheels
s10aa04
. Promptly wipe the alloy wheels clean of
any kind of grime or agent. If dirt is left
on too long, it may be difficult to clean
off.
. Do not use soap containing grit to clean
the wheels. Be sure to use a neutral
cleaning agent, and later rinse thor-
oughly with water. Do not clean the
wheels with a stiff brush or expose them
to a high-speed washing device.
. Clean the vehicle (including the alloy
wheels) with water as soon as possible
when it has been splashed with sea
– CONTINUED –
Exterior Care
449
10
Appearance Care
Loading ...
Loading ...
Loading ...