Loading ...
Loading ...
Loading ...
(319,1)
北米Model "A1525BE-A" EDITED: 2023/ 4/ 24
2. Make sure the parking brake is ap-
plied.
3. Make sure the select lever is in the “P”
position. The engine can also start
when the select lever is in the “N”
position, however, for safety reasons,
start in the “P” position.
4. Depress the brake pedal until the
operation indicator on the push-button
ignition switch turns green. When
starting with the select lever in the “N”
position, the indicator does not turn
green.
5. While depressing the brake pedal,
press the push-button ignition switch.
NOTE
While pressing the select lever button
in, the indicator on the push-button
ignition switch will not turn green even
when the select lever is in the “P”
position.
& Stopping Engine
s07be04
1. Stop the vehicle completely.
2. Move the select lever to the “P”
position.
3. Press the push-button ignition switch.
The engine will stop, and the power will
be switched off.
WARNING
. Do not touch the push-button
ignition switch during driving.
When the push-button ignition
switch is operated as follows,
the engine will stop.
– The switch is pressed and held
for 3 seconds or longer.
– The switch is pressed briefly 3
times or more in succession.
The power steering system will
not operate either. A greater force
will be required to steer, and it
may result in an accident.
. If the engine stops during driving,
do not operate the push-button
ignition switch or open any of the
doors until the vehicle is stopped
in a safe location. It is dangerous
because the steering lock may be
activated. Stop the vehicle in a
safe place, and contact a
SUBARU dealer immediately.
CAUTION
. Do not stop the engine while the
select lever is in a position other
than the “P” position.
. If the engine is stopped while the
select lever is in a position other
than the “P” position, the power
will be in “ACC”. If the vehicle is
left in this condition, the battery
may be discharged.
NOTE
. If you press the push-button ignition
switch while driving, the emergency
engine stop interrupt screen alerts
the driver by messages on the
combination meter display (color
LCD) and beeps.
– CONTINUED –
Starting and Stopping Engine (Models with Push-Button Start System)
317
7
Starting and Operating
Loading ...
Loading ...
Loading ...