Loading ...
Loading ...
Loading ...
(238,1)
北米Model "A1525BE-A" EDITED: 2023/ 4/ 24
High beam assist indicator
When the high beam assist function is
activated, the high beam assist indicator
on the combination meter will illuminate.
NOTE
If the high beam assist function is
malfunctioning or is temporarily
stopped, the headlight will be fixed at
low beam.
! How to temporarily lower the sensi-
tivity of the high beam assist func-
tion
s03ah0704
The sensitivity of the high beam assist
function can be lowered by using the
following operations.
1. After turning the ignition switch to the
“ON” position, set the light control
switch to the “AUTO” position and push
the signal lever forward (high beam
position).
2. After the high beam assist indicator on
the combination meter will illuminate,
turn the ignition switch to the “OFF”
position.
3. Turn the ignition switch to the “ON”
position and within approximately 15
seconds, press the “
/ ” (following
distance setting) switch more than 10
times consecutively.
When the sensitivity of the high beam
assist function is lowered, the high beam
assist indicator light “
” on the combina-
tion meter display (color LCD) will flash.
NOTE
. The sensitivity of the high beam
assist function cannot be lowered
in the following conditions.
– Cruise control indicator is illumi-
nated.
– The EyeSight warning indicator
(yellow) is illuminated.
. The sensitivity of the high beam
assist function returns to normal
level the next time the ignition
switch is turned to the “LOCK”/
“OFF” position and the engine is
restarted.
! How to change the headlight mode
manually
s03ah0702
Change to the low beam:
. Set the light control switch to “
”.
. Pull the lever while the high beam is
turning on and release it.
Change to the high beam:
Push the lever forward and release it.
At this time, the high beam assist function
will turn off, the high beam assist indicator
will turn off and the high beam indicator
light will turn on.
NOTE
. After manually changing the head-
light mode to the high beam, if you
turn on the high beam assist func-
tion, push the lever forward and
release it.
. When manually changing the head-
light mode to the high beam, if you
turn the light control switch to the
“
” position, the parking lights,
front side marker lights, rear side
marker lights, tail lights and license
plate lights will turn on.
Light Control Switch
236
Loading ...
Loading ...
Loading ...