Loading ...
Loading ...
Loading ...
(369,1)
北米Model "A1525BE-A" EDITED: 2023/ 4/ 24
turned on, the brightness of the
BSD/RCTA approach indicator light
will not be reduced. For details about
the illumination brightness control
dial, refer to “Illumination Bright-
ness Control” �P155.
! BSD/RCTA approach warning buz-
zer (only when reversing)
s07bm0302
A warning buzzer sounds along with
flashing of the BSD/RCTA approach in-
dicator light to warn the driver of dangers.
The setting of the warning buzzer volume
can be changed by operating the center
information display. For details, refer to
“Car settings” �P203 (11.6-inch display
models) or “Vehicle setting icons” �P221
(dual 7.0-inch display models).
! Safety tips regarding the BSD/RCTA
approach indicator light/warning
buzzer
s07bm0303
. In the following cases, operation of the
BSD/RCTA approach indicator light
and the warning buzzer may be de-
layed or the system may fail to issue
these warnings.
– When a vehicle moves to the neigh-
boring lane from a lane next to the
neighboring lane
– When driving on a steep incline or
on repeated sharp uphill and down-
hill grades
– When going beyond a pass
– When both your vehicle and a
vehicle driving on a neighboring
lane are driving on the far side of
each lane.
– When several narrowly-spaced ve-
hicles are approaching in a row
– In low radius bends (tight bends or
when making turns at an intersec-
tion)
– When there is a difference in height
between your lane and the neigh-
boring lane
– Immediately after the BSD/RCTA is
activated by touching “Rear Vehicle
Detection (BSD/RCTA)”
– Immediately after the select lever is
shifted to the “R” position
– When extremely heavy cargo is
loaded in the cargo area
. During reversing, operation of the BSD/
RCTA approach indicator light and the
warning buzzer may be delayed or the
system may fail to issue these warnings
under the following conditions.
– When backing out of an angled
parking space
– When a large-sized vehicle is
parked next to your vehicle (That
vehicle prevents the propagation of
radar waves.)
– When reversing on sloped roads
– When reversing at a high speed
. The BSD/RCTA approach indicator
light may illuminate when driving close
to solid objects on the road or road side
(such as guardrails, tunnels and side-
walls).
. When turning at an intersection in
urban areas, or a multilane intersection,
the BSD/RCTA approach indicator light
may flash.
. If a building or a wall exists in the
reversing direction, the BSD/RCTA
approach indicator light may flash and
the warning buzzer may sound.
. In the following cases, the system may
detect a vehicle driving two lanes away
from your vehicle.
– When your vehicle drives on the
– CONTINUED –
BSD/RCTA
367
7
Starting and Operating
Loading ...
Loading ...
Loading ...