Loading ...
Loading ...
Loading ...
(115,1)
北米Model "A1525BE-A" EDITED: 2023/ 4/ 24
less access function may not oper-
ate properly.
. When the access key fob is within
the operating range, it is possible for
anyone, even someone who is not
carrying the access key fob, to
operate the keyless access function.
Note that the keyless access func-
tion can be operated only by the
door handle, door lock sensor or
rear gate opener button in the oper-
ating range in which the access key
fob is detected.
. It is not possible to lock the doors,
the rear gate and the fuel filler lid
using the keyless access function
when the access key fob is inside the
vehicle. However, depending on the
status of the access key fob and the
environmental conditions, the ac-
cess key fob may be locked inside
the vehicle. Before locking the vehi-
cle, make sure that you have the
access key fob.
. When the battery of the access key
fob is discharged, or when operating
it in a location with strong radio
waves or noise (e.g., near a radio
tower, power plant, broadcast sta-
tion or an area where wireless equip-
ment is used), or while talking on a
cell phone, the operating ranges
may be reduced, or the keyless
access function may not operate.
In such a case, perform the proce-
dure described in “Locking and
Unlocking” �P441.
. The doors may lock or unlock when
the car is being washed or exposed
to a significant amount of water that
touches the door handle while the
key fob is still in the operating range.
! How to lock and unlock
s02ap0108
It is possible to perform the following
operations when you are carrying the
access key fob.
. Lock and unlock the doors and the fuel
filler lid.
. Lock and unlock the rear gate.
NOTE
. It is not possible to lock the doors,
the rear gate and the fuel filler lid
using the keyless access function
when the push-button ignition
switch is in the “ACC” or “ON”
position. Refer to “Switching Power
Status” �P151.
. If the door handle is gripped with a
gloved hand, the door lock may not
be released.
. If the door lock sensor is touched
four times or more repeatedly, the
system will ignore the sensor opera-
tion.
. When performing the locking proce-
dure too quickly, locking may not
complete. After performing the lock-
ing procedure, it is recommended to
pull the rear door handle to confirm
that the doors have been locked.
. If any of the doors (including the rear
gate) is not fully closed, the follow-
ing will occur to alert you.
– An electronic chirp sounds five
times.
– The hazard warning flashers
flash five times.
. If any of the doors or the rear gate is
open, the doors, the rear gate and
the fuel filler lid cannot be locked.
. Within 3 seconds after locking the
doors and the rear gate using the
keyless access function, it is not
possible to unlock the doors and/or
the rear gate using the keyless
access function.
. When locking, be sure to carry the
access key fob to prevent locking
the access key fob in the vehicle.
. The setting of the hazard warning
flasher operation can be changed by
operating the center information dis-
play. For details, refer to “Car set-
tings” �P203 (11.6-inch display
models) or “Vehicle setting icons”
– CONTINUED –
Keyless Access with Push-Button Start System
113
2
Keys and Doors
Loading ...
Loading ...
Loading ...