Loading ...
Loading ...
Loading ...
(352,1)
北米Model "A1525BE-A" EDITED: 2023/ 4/ 24
“LOCK”/“OFF” position.
. The vehicle is stopped on a steep
slope.
. The Auto Vehicle Hold function is
malfunctioning.
In such cases, the Auto Vehicle Hold
indicator light will turn off and the electronic
parking brake indicator light will illuminate.
! Tips
s07ap030505
. When the electronic parking brake is
automatically applied with the vehicle
kept stopped by the Auto Vehicle Hold
function, release the electronic parking
brake by either of the following opera-
tions before starting off. Then make
sure that the electronic parking brake
indicator light is off.
– Depress the accelerator pedal with
the driver’s seatbelt fastened and
with the doors closed.
– Press the electronic parking brake
switch with the brake pedal de-
pressed.
. Under certain conditions, including a
malfunction of the Auto Vehicle Hold, a
warning buzzer will sound and a warn-
ing message will appear on the combi-
nation meter display (color LCD). All
warning messages should be strictly
observed.
. On a steep slope, the vehicle cannot be
kept stopped by the Auto Vehicle Hold
function. In such a case, depress and
hold the brake pedal.
. When stopping on a steep slope with
the Auto Vehicle Hold function acti-
vated, the electronic parking brake may
be automatically applied after stopping,
then the electronic parking brake in-
dicator light may flash. In such a case,
depress and hold the brake pedal while
stopped. Otherwise, the vehicle may
move. When getting out of the vehicle,
stop the vehicle on a flat surface, then
apply the electronic parking brake.
. If the Auto Vehicle Hold indicator light
does not illuminates even after touch-
ing “Auto Vehicle Hold (AVH)” with the
operating conditions met, the function
may have a malfunction. Contact your
SUBARU dealer for an inspection.
. You may hear a sound while the Auto
Vehicle Hold function is keeping your
vehicle stopped. This is normal, and
does not represent a malfunction.
. When you depress the brake pedal to
release the Auto Vehicle Hold function,
an operation sound or vibration may be
generated, or the brake pedal may
return slowly. This is not a malfunction.
. While the vehicle is kept stopped by the
Auto Vehicle Hold function, the brake
pedal may feel stiff. However, this is not
a malfunction.
. When using the Auto Vehicle Hold
function, depress the brake pedal
firmly. Otherwise, the Auto Vehicle Hold
may not operate.
! Emergency brake
s07ap0303
CAUTION
Use the emergency brake only in
case of an emergency. If the emer-
gency brake is excessively used, the
brake parts will wear down faster or
the brake may not work sufficiently
due to brake overheating.
NOTE
. While using the emergency brake,
the electronic parking brake indica-
tor light and the indicator light on the
parking brake switch illuminate and
a chirp sounds.
. While using the emergency brake, a
sound may be heard from the engine
compartment. This is the operating
sound of the brake that is activated
by the Vehicle Dynamics Control
system, and does not indicate a
malfunction.
Parking Your Vehicle
350
Loading ...
Loading ...
Loading ...