Loading ...
Loading ...
Loading ...
(157,1)
北米Model "A1525BE-A" EDITED: 2023/ 4/ 24
We recommend that you drive moderately
until the pointer of the temperature gauge
reaches near the middle of the range.
Engine operation is optimum with the
engine coolant at this temperature range
and high revving operation when the
engine is not warmed up enough should
be avoided.
CAUTION
If the pointer exceeds the normal
operating range, safely stop the
vehicle as soon as possible.
Refer to “Engine Overheating”
�P435.
& Combination Meter Settings
s03ad16
Meter settings can be set on the center
information display. For details, perform
the procedures described in “General
settings” �P198 (11.6-inch display mod-
els) or “General settings” �P215 (dual
7.0-inch display models).
3-5. Illumination Brightness
Control
s03aj
The illumination brightness of the combi-
nation meter and center information dis-
play dims under the following conditions.
. The light switch is in the “
” or “ ”
position when the ambient light is dark.
. The light switch is in the “AUTO”
position and the headlights illuminate
automatically.
You can adjust the illumination brightness
for better visibility.
To brighten, turn the control dial upward.
To darken, turn the control dial downward.
NOTE
. When the control dial is turned fully
upward, the illumination brightness
becomes the maximum and the
automatic dimming function does
not work at all.
. The brightness setting is not can-
celed even when the ignition switch
is turned to the “LOCK”/“OFF” posi-
tion.
. The operation method of illumina-
tion brightness will differ depending
whether or not “Brightness Dial” in
the center information display is on.
Refer to the operation method in-
dicated the following table.
“Brightness Dial” is on.
Operational
item
Combi-
nation
meter
Center
informa-
tion dis-
play
Control dial Available Available
“Brightness”*
1
on the center
information
display
Not avail-
able
Not avail-
able
– CONTINUED –
Illumination Brightness Control
155
3
Instruments and Controls
Loading ...
Loading ...
Loading ...