Loading ...
Loading ...
Loading ...
(253,1)
北米Model "A1525BE-A" EDITED: 2023/ 4/ 24
1 Garage door opener remote
2. Position the hand-held remote (garage
door opener remote) 1 to 3 inches (2 to
8 cm) away from the HomeLink
®
button
that you would like to program.
NOTE
Some hand-held remotes (garage door
opener remotes) may actually train
better at a distance of 6 to 12 inches
(15 to 30 cm). Keep this in mind if you
have difficulty with the programming
process.
3. While the HomeLink
®
indicator light is
flashing orange, press and hold the
hand-held remote button. Continue
pressing the hand-held remote button
until the HomeLink
®
indicator light
changes from orange to green. You
may now release the hand-held remote
button.
NOTE
Some devices may require you to re-
place this “Programming a New
HomeLink
®
button” step 3 with proce-
dures noted in the “Gate Operator /
Canadian Programming” section. Refer
to “Gate Operator/Canadian Program-
ming” �P253.
1 Indicator Light
4. Press the HomeLink
®
button that you
would like to program and observe the
indicator light.
. If the indicator light remains constant
green, your device should operate
when the HomeLink
®
button is
pressed. At this point, if your device
operates, programming is complete.
. If the indicator light rapidly flashes
green, firmly press, hold for two
seconds and release the HomeLink
®
button up to three times to complete
the programming process. At this
point if your device operates, pro-
gramming is complete. If the device
does not operate, continue with the
next step of the programming in-
structions.
– CONTINUED –
Mirrors
251
3
Instruments and Controls
Loading ...
Loading ...
Loading ...