Loading ...
Loading ...
Loading ...
(62,1)
北米Model "A1525BE-A" EDITED: 2023/ 4/ 24
child with proper protection. The child
restraint system should meet all applicable
requirements of Federal Motor Vehicle
Safety Standards for the United States or
of Canada Motor Vehicle Safety Standards
for Canada. It can be identified by looking
for the label on the child restraint system or
the manufacturer’s statement of compli-
ance in the document attached to the
system. Also it is important for you to make
sure that the child restraint system is
compatible with the vehicle in which it will
be used.
NOTE
Some sizes of child restraint systems
may not fit the vehicle seat. Before
purchasing a child restraint system,
check whether it fits on the vehicle seat.
& When Installing the Forward-
Facing Child Restraint Sys-
tem on the Front Passenger’s
Seat
s01ag15
WARNING
. NEVER INSTALL A REARWARD-
FACING CHILD RESTRAINT SYS-
TEM ON THE FRONT PASSEN-
GER’S SEAT. DOING SO RISKS
SERIOUS INJURY OR DEATH TO
THE CHILD BY PLACING THE
CHILD’S HEAD TOO CLOSE TO
THE SRS AIRBAG.
. The front passenger’s seat is not
equipped with tether an-
chorages. Therefore, when in-
stalling a child restraint system
that uses tether straps, do not
install it on the front passenger’s
seat.
Only forward-facing child restraint sys-
tems (including booster seats) can be
installed on this seat and should only be
installed when it is unavoidable. When you
install a forward-facing child restraint
system to the front passenger’s seat,
perform the following procedure.
A Seat position: Rearmost as possible
B Seat cushion height (if equipped): Upper
most
C Seatback: Upright
1. Adjust the front passenger’s seat as
illustrated.
2. Install the child restraint system to the
front passenger’s seat. Refer to “In-
Child Restraint Systems
60
Loading ...
Loading ...
Loading ...