Loading ...
Loading ...
Loading ...
(236,1)
北米Model "A1525BE-A" EDITED: 2023/ 4/ 24
. The locking procedure is performed
twice. When performing the unlocking
procedure after performing the locking
procedure, perform the locking proce-
dure twice again.
*1: The setting for the period of time in which the
low beam headlights remain on by the
welcome lighting function can be changed
by a SUBARU dealer. Contact your
SUBARU dealer for details. Also, you can
change the setting by operating the center
information display. For details, refer to “Car
settings” �P203 (11.6-inch display models)
or “Vehicle setting icons” �P221 (dual 7.0-
inch display models).
! Sensor for the auto on/off head-
lights
s03ah0101
The sensor is on the dashboard as shown
in the illustration.
CAUTION
If any object is placed on or near the
sensor, the sensor may not detect
the level of the ambient light cor-
rectly and the auto on/off headlights
may not operate properly.
& High/Low Beam Change
(Dimmer)
s03ah02
While the light control switch is in the “ ”
or “AUTO” position in a dark place, the
headlights will turn on.
Pushing the lever forward and releasing it
will activate the high beam. Pulling the
lever rearward and releasing it will switch
the headlights to low beam.
When the light control switch is in the
“AUTO” position, pushing the lever for-
ward turns the High Beam Assist is on.
Refer to “High Beam Assist Function”
�P235.
When the headlights are on high beam, the
high beam indicator light “
” on the
combination meter is also on.
Light Control Switch
234
Loading ...
Loading ...
Loading ...