Loading ...
Loading ...
Loading ...
71
9. Specications
Model S3M10K1B S3M10K2B S3M10K3B S3M10K-NIB S3M15K2B S3M15K3B S3M15K-NIB S3M20K3B S3M20K-NIB
OVERVIEW
Capacity 10 kVA/10 kW 10 kVA/10 kW 10 kVA/10 kW 10 kVA/10 kW 15 kVA/15 kW 15 kVA/15 kW 15 kVA/15 kW 20 kVA/20 kW 20 kVA/20 kW
Topology True On-Line Double Conversion; Voltage- and Frequency-Independent (VFI)
INPUT
Voltage and Phase Ph-Ph 208/220V (Ph-N 120V/127V); 3-Phase, Neutral and Ground
Voltage Range -20%, +25% (Ph-Ph 166–260V or 176–275V) at 100% Load; -40%, +25% (Ph-Ph 125–260V or 132–275V) at <50% Load
Frequency (Range) 50/60 Hz, Selectable (40 – 70 Hz)
Power Factor ≥ 0.99 (Linear Load)
Dual AC Input Yes
Harmonic Distortion < 2% THDi (100% Load)
OUTPUT
Voltage and Phase Ph-Ph 208/220V (Ph-N 120V/127V); 3-Phase, Neutral and Ground
AC Voltage Regulation ±1% of Nominal (Double-Conversion Mode, Converter Mode or Battery Mode); ±10% of Nominal (ECO Mode)
Power Factor 1.0 (Unity Output Power Factor)
Frequency Selectable ±1%, ±2%, ±4%, ±5%, ±10% of Input (Default: ±10%)
Frequency Regulation ±0.1 Hz (Converter Mode or Battery Mode)
Overload (AC Mode) Load ≤ 110%=1 hour; Load ≤ 125%=10 min.; Load ≤ 150%=1min.; Load >150%=Bypass
Crest Factor 3:1 Maximum
Harmonic Distortion ≤ 1% THD (100% Linear Load); ≤ 3% THD (100% Non-Linear Load)
Waveform Pure Sine Wave
Transfer Time 0 ms (Line ‹–› Battery and Inverter ‹–› Bypass)
Parallel Capability Parallel Up to 4 Units for Increased Capacity or N+N Redundancy
BYPASS
Bypass Voltage Range Upper Limit: +10%, +15%, +20% or +25% (Default: +20%); Lower Limit: -10%, -20%, -30% or -40% (Default: -30%)
Bypass Frequency Range ±10% (Adjustable)
EFFICIENCY
AC Line Mode
Up to 94%
ECO Mode Up to 98%
BATTERY AND CHARGER
Battery Type 12V Maintenance-Free Non-Spillable VRLA AGM/GEL
DC Acceptance Voltage ±120V DC (240V DC) (Nominal)
Battery Conguration Internal Only Internal Only Internal Only External Only* Internal Only Internal Only External Only* Internal Only External Only*
Internal Battery Quantity 20 x 9 Ah 40 x 9 Ah 60 x 9 Ah None* 40 x 9 Ah 60 x 9 Ah None* 60 x 9 Ah None*
Runtime (100% Load) 4 min. 9 min. 20 min. 27 – 88 min.* 6 min. 13 min. 15 – 55 min.* 7 min. 10 – 38 min.*
Runtime (50% Load) 10 min. 22 min. 45 min. 60 – 212 min.* 13 min. 27 min. 35 – 125 min.* 16 min. 27 – 88 min.*
External Battery Packs (BP) /
Cabinet for UPS Models
without Internal Batteries
Refer to section 3.9.1 UPS and Battery Cabinet Compatibility
Recharge Time to 90% 4 hr. 4 hr. 4 hr. Varies with BP 4 hr. 4 hr. Varies with BP 4 hr. Varies with BP
Charging Current (Default) 1 – 20A (2.25A) 1 – 20A (4.5A) 1 – 20A (6.75A) 1 – 20A (4.5A) 1 – 20A (4.5A) 1 – 20A (6.75A) 1 – 20A (4.5A) 1 – 20A (6.75A) 1 – 20A (4.5A)
ENVIRONMENT
Operating Temperature 0 – 40˚ C (≤ 25˚ C for optimal battery lifespan.)
Storage Temperature 0 – 35˚ C (UPS with batteries.); -15 – 60˚ C (UPS without batteries.)
Operating Humidity 0 – 95% (Non-Condensing)
Operating Altitude < 1000 m (Derate output power by 1% per 100 m above 1000 m.)
Audible Noise at 1 m < 58 dBA < 58 dBA < 58 dBA < 58 dBA < 58 dBA < 58 dBA < 58 dBA < 60 dBA < 60 dBA
Heat Dissipation
(100% Load)
2457 BTU/h 3686 BTU/h 4915 BTU/h
MANAGEMENT
Control Panel Large 12.7 cm (5-inch) Multi-Language Touchscreen Display with Supplemental LEDs
Communications
SNMP Network Management Card (WEBCARDLXMINI)**, Relay I/O Card Slot, EPO/REPO, Temp Probe, MODBUS RTU via RS-485, RS-232 and USB Ports
STANDARDS
Safety UL1778:2014 (5th Edition); CAN/CSA-C22.2 No. 107.3-14 (3rd Edition)
EMC/EMI FCC Part 15B Class A
Additional ENERGY STAR 2.0, RETIE, IP20 Ingress Protection Rating; RoHS; ISTA 3B/Vibration, Shock and Tip tested.
PHYSICAL
Unit Dimensions
(H x W x D)
868 x 250 x 900 mm
(34.2 x 9.8 x 35.4 in.)
Unit Weight
136 kg
(300 lb.)
187 kg
(412 lb.)
237 kg
(522 lb.
81 kg
(179 lb.)
188 kg
(414 lb.)
238 kg
(525 lb.)
82 kg
(181 lb.)
239 kg
(527 lb.)
83 kg
(183 lb.)
* Runtimes depend on the external battery cabinet model being used. ** WEBCARDLXMINI is an optional accessory available for all models.
Loading ...
Loading ...
Loading ...