Loading ...
Loading ...
Loading ...
Seats and head restraints
97
Seat functions
●
Press the memory button in which to store the
settings within appr
ox. 10 seconds. A warning
sound will confirm they have been stored.
Storing the passenger rear view mirror set-
tings while driving in reverse
●
Apply the electronic parking brake.
●
Move the gearshift to the neutral position.
●
Switch the ignition on.
●
Press the required memory button.
●
Select reverse gear.
●
Adjust the front passenger exterior mirror so
that you can see, for example, the kerb edge
well.
●
The new position of the mirror will be stored
automatically and allocated to the vehicle key
that was used to unlock the vehicle.
Activating settings
●
With the vehicle stopped and the ignition
switched on, press and hold the correspond-
ing memory button until the saved position is
reached.
●
OR: With the ignition switched o and the
driver's door open, briefly press the corre-
sponding button.
The front passenger side exterior mirror auto-
matically changes from the position stored for
reversing as soon as the vehicle moves forward
at a speed of at least 15km/h (10mph) or when
the gear selection lever is changed to a position
other than R ›››page110.
Initialising the seat position memory
The position memory system must be restar-
ted if, for example, the driver seat has been
changed.
Restarting deletes all memories and assign-
ments for the seat with position memory. The
memory keys can then be programmed again.
●
Open the driver door and do not get into the
vehicle.
●
Operating the seat settings from outside the
vehicle.
●
Tilt the backrest fully forward.
●
Release the control to set the angle and then
press again until an audible warning is heard.
WARNING
Adjust the memory function only when the
v
ehicle is stationary.
Note
If the driver door is opened approx. 10 mi-
nut
es after the vehicle was unlocked or later,
the driver seat and the exterior mirrors do not
move automatically.
Front centre armrest
Fig.80 Fr
ont centre armrest
To r
aise the armrest, pull it fully up in the direc-
tion of the arrow ›››Fig.80 up or step by step
depending on the desired opening.
To lower the armrest, first lift it to its highest
position. Then lower it down.
To move the armrest horizontally, move it for-
ward ›››Fig.80 or backward as much as possi-
ble in the direction of the corresponding arrow.
WARNING
The front centre armrest may obstruct the
driv
er's arm movements, which could cause
an accident and severe injuries.
●
Keep the storage compartments of the
centre armrest closed at all times while the
vehicle is in motion.
Loading ...
Loading ...
Loading ...