Loading ...
Loading ...
Loading ...
Driving
135
Start-Stop system
1)
Only in vehicles with Keyless Access.
●
Immediately after pushing the starter button,
k
eep the key next to the right trim of the steer-
ing column ›››Fig.97, as close as possible to
the Kessy logo.
●
The ignition connects and the engine starts
automatically.
Indications for the driver on the in-
strument cluster screen
Depress the clutch
●
This indication is displayed on vehicles with
a manual gearbo
x when the driver does not
depress the clutch pedal when starting the en-
gine. The engine can only be started if the
clutch pedal is depressed.
Press the brake
●
This message appears on vehicles with an
automatic gearbox if the driver tries to start the
engine without having the brake pedal pressed.
Select N or P
●
This message appears if you try to start or
stop the engine when the selector lever of the
automatic gearbox is not in position P or N.
The engine can only be started and stopped
in those positions.
Engage position P; the vehicle can
move; doors can only be locked in
position P.
●
For safety reasons, this driver message ap-
pears and an audibl
e warning sounds if the se-
lector lever of the automatic gearbox is not in
position P after you switch o the ignition. Move
the selector lever to the P position, otherwise
the vehicle could move.
Gear change: Selector lever in the
drive position!
●
This driver message is displayed when the
selector lever is not in the position P when the
driver door is opened. Additionally, a buzzing
sound is emitted. Put the selector lever in posi-
tion P, otherwise the vehicle could roll away.
Ignition is switched on
●
This driver message is displayed and a buz-
zer is sounded when the driver door is opened
with the ignition switched on.
Start-Stop system
Description and operation
The Start-Stop system helps you to save fuel
and reduce CO
2
emissions.
In Start-Stop mode, the engine will automati-
cally switch o when the vehicle stops or is
stopping. The ignition remains switched on. The
engine automatically switches back on when
required.
In this scenario, the light of the
button remains lit.
1)
When the ignition is s
witched on, the Start-Stop
function is automatically activated.
Control lamps
The Start-Stop system is available, the
automatic engine shutdown is active.
The Start-Stop system is not available or
has been disconnected.
Stopping and starting the engine
Vehicles with a manual gearbox:
●
When the vehicle is stopped, put it into neu-
tral and release the clutch pedal. The engine
will stop. The warning lamp
will light up on
the displ
ay. The engine may be stopped before
the vehicle comes to a standstill (approximately
7 km/h).
●
When you depress the clutch pedal, the en-
gine will start again. The indicator lamp goes
out.
Loading ...
Loading ...
Loading ...