User Manual - Page 71

For ATECA 2022.

Loading ...
Loading ...
Loading ...
Opening and closing
69
Set of vehicle keys
Changing the battery
Fig.49 V
ehicle key: opening the battery
compartment.
Fig.50 V
ehicle key: removing the battery.
SEAT recommends you ask a specialised work-
shop t
o replace the battery.
The battery is located to the rear of the vehicle
key, under a cover.
Changing the battery
Remove the emergency key ›››page68.
Insert a flat bl
ade screwdriver into the vehicle
key, through the outer guide of the emergency
key, approx. 1 cm in the direction of the arrow
›››Fig.49
1
.
Turn the screwdriver clockwise until the cover
opens ›››Fig.49
2
Open the cover in the direction indicated by
the arr
ow ›››Fig.49
3
and remove it ›››
.
Lever the battery out of its compartment
›››Fig.50.
Fit a new button battery into the compart-
ment ››› .
Put on the cover and press it into the housing
until it clicks int
o place.
Stow the emergency key.
WARNING
Swallowing a battery with a 20 mm diameter
or any other butt
on battery can cause seri-
ous and even fatal injuries within a very short
time.
Keep the vehicle key and key fobs with bat-
teries out of reach of children.
If you suspect that someone may have
swallowed a battery, seek immediate medi-
cal attention.
NOTICE
If the battery is not changed correctly, the
v
ehicle key may be damaged.
Use of unsuitable batteries may damage
the vehicle key. For this reason, always re-
place the dead battery with another of the
same voltage, size and specifications.
When fitting the battery, check that the po-
larity is correct.
For the sake of the environment
Please dispose of your used batteries cor-
r
ectly and with respect for the environment.
Synchronize the vehicle key
If the
button is pressed frequently outside of
the v
ehicle range, it is possible that the vehicle
can no longer be locked or unlocked using the
key. In this case, the key must be resynchron-
ised as described below:
Unfold the vehicle key blade ›››page67 .
If necessary, remove the cover from the driver
door handle ›››page78.
Press the
button on the vehicle key. For this,
it must r
emain with the vehicle.
Open the vehicle within one minute using the
key blade. The key has been synchronised.
If necessary, fit the cap.
Loading ...
Loading ...
Loading ...