Loading ...
Loading ...
Loading ...
144
Driving
NOTICE
The driver message Inertia is only displayed
with the curr
ent consumption. In inertia mode
the gear will no longer be displayed (for ex-
ample D or E will appear instead of D7 or E7).
NOTICE
The inertia mode will be automatically dis-
connect
ed on gradients steeper than 15%.
Note
In the case of the TDI and 2.0l TSI engines,
the iner
tia mode will only work in the Eco
driving mode.
Troubleshooting
The engine does not start
The indicat
or lamp lights up green.
The brake is not depressed, e.g. when trying to
change the gear selector lever.
●
To select a gear range, press the brake
pedal.
Selector lever lock
The contr
ol lamp flashes green.
The selector lever locking button is not en-
gaged. The vehicle is prevented from moving
forwards. Engage the selector lever lock.
Indications on the instrument cluster display:
Clut
ch
Clutch overheated! Please stop!
●
The clutch has overheated and could be
damaged. St
op and wait for the gearbox to
cool with the engine at idling speed and the
selector lever in position P. When the warning
lamp and the driver message switch o, have
the fault corrected by a specialised workshop
without delay. If they do not turn o, do not
continue driving. Seek specialist assistance.
Faults in the gearbox
Gearbox: Fault! Stop the vehi-
cle and place the lever in the P
●
There is a fault in the gearbox. Stop the vehi-
cl
e in a safe place and do not continue driving.
Seek specialist assistance.
Gearbox: System fault! You may
continue driving
●
Have the fault corrected by a specialised
w
orkshop without delay.
Gearbox: System fault! You can
continue driving with restrictions.
Reverse gear disabled
●
Take the vehicle to a specialised workshop
and hav
e the fault repaired.
Gearbox: System fault! You can
continue driving in D until switch-
ing off the engine
●
Park the vehicle in a safe place. Seek special-
ist assist
ance.
Gearbox: too hot. Adapt your
driving accordingly
●
Continue driving at moderate speeds. When
the w
arning lamp switches o, you can con-
tinue driving in a normal manner.
Gearbox: press the brake and
engage a gear again
●
If the warning was caused by the temperature
of the gearbo
x, this driver message will be dis-
played when the gearbox has cooled again.
Back-up programme
If all the gear positions are shown over a light
background on the instrument cluster, there is
a system fault and the automatic gearbox will
operate with the backup programme. It is still
possible to drive the vehicle, however, at low
speeds and within a selected range of gears.
Driving in reverse gear may not be possible.
Loading ...
Loading ...
Loading ...