User Manual - Page 73

For ATECA 2022.

Loading ...
Loading ...
Loading ...
Opening and closing
71
Keyless Access system
The next time, the vehicle can only be unlocked
el
ectronically with the vehicle key. After being
unlocked the next time, the Keyless Access sys-
tem will be activated again ›››
.
P
ermanently disabling the Keyless Access
system
The Keyless Access system can also be perma-
nently deactivated in the infotainment system
›››
.
Conv
enience functions
To close all the electric windows and the sun-
roof using the comfort function, keep a finger
for a few seconds on the locking sensor surface
›››Fig.52
B
of the door handle until the win-
do
ws and roof have closed.
How the doors open when touching the sensor
surface on the door handle will depend on the
settings that have been activated in the info-
tainment system, using the function button
> Settings > Opening and closing.
NOTICE
Deactivating the Keyless Access system also
deactiv
ates the sensor controlled opening
and closing of the rear lid, although the func-
tion is shown as “active” in the vehicle menu.
Troubleshooting
The K
eyless Access system does not work
The operation of the sensor surfaces may be
limited if they are very dirty.
Clean the sensor surfaces.
All turn signals flash four times
The key that was last used is still inside the vehi-
cle.
Remove the key and lock the vehicle.
Automatic deactivation of the sensor surfa-
ces
The sensor surfaces are deactivated in the fol-
lowing cases:
If the vehicle is not unlocked or locked for a
long period of time.
If any of the sensor surfaces are activated
unusually often.
To reactivate the sensor surfaces:
Unlock the vehicle using the
button on the
v
ehicle key.
NOTICE
The sensor surfaces on the door handles
may activ
ate if hit by a jet of water or high
pressure steam if there is a valid vehicle key
in the proximity area. If at least one of the
windows is open and the sensor surfaces on
one of the handles permanently activates,
all of the windows will close. If the jet of wa-
ter or steam is briefly moved away from the
sensor surfaces of one of the handles and
redirected towards them, all of the windows
may open.
Note
If the message Keyless system faulty
is displ
ayed on the instrument cluster dis-
play, abnormalities may occur in the opera-
tion of the Keyless Access system. Contact a
specialised workshop.
Note
If there is no vehicle key inside the vehicle or
the syst
em fails to detect one, a warning will
display on the instrument cluster screen. This
could happen if any other radio frequency
signal interferes with the key signal or if the
key is covered by another object, e.g. a metal
case.
Loading ...
Loading ...
Loading ...