Loading ...
Loading ...
Loading ...
Parking and manoeuvring
185
General information on parking systems
1. The vehicle is kept stationary with the brake
pedal on a flat surf
ace or on a slope.
2. The engine rotates “correctly”.
The Auto Hold function disconnects automati-
cally if the following conditions are met:
1. If any of the requirements of the function
are no longer met.
2. If the engine runs erratically or has any
anomaly.
3. If the engine stalls.
4. Manual gearbox: If the clutch and the ac-
celerator are pressed at the same time.
Automatic gearbox: If the accelerator is
pressed.
5. Automatic gearbox: If any of the tyres have
only minimal contact with the ground, e.g.
For example, if the axles are crossed.
WARNING
The smart technology of the Auto-Hold can-
not o
vercome the limits imposed by the laws
of physics and it only operates within the lim-
its of the system. Never allow the enhanced
convenience of the Auto-Hold function to in-
duce you to take any risk that compromises
safety.
●
Never leave the vehicle running with the
Auto Hold function switched on.
●
The Auto-Hold cannot always keep the ve-
hicle stopped on an uphill, or brake it su-
ciently on a downhill, e.g. on slippery or icy
surfaces.
NOTICE
Always deactivate the Auto-Hold function
bef
ore entering an automatic car wash fa-
cility. Failure to do so could cause damage
due to the automatic application of the park-
ing brake.
General information on
parking systems
Automatic brake operation
The automatic braking feature of a parking sys-
tem is used to reduce the danger of collision
when an obstacle is detected during a parking
manoeuvre.
Braking functions
Depending on the equipment, the following
systems are available:
●
Park assist plus manoeuvre braking function
›››page186.
●
Rear cross tr
ac alert emergency brake
function ›››page206.
●
Assisted parking assistant emergency brake
function ›››page192.
●
Trailer Assist manoeuvre braking function
›››page204
R
equirements
●
The vehicle is moving between approx.
3km/h and 8km/h when manoeuvring
●
A parking system is switched on.
The brakes are not automatically operated
when park assist is switched on automatically
while moving forward.
What happens in the event of automatic
braking?
If there is an obstacle, the system brakes the
vehicle to a standstill and keeps it stationary for
approx. 2 seconds. Press the brake!
Activate
●
Automatic braking is activated when the
driver switches a parking system on.
Deactivating
●
The automatic brake operation function de-
activates when a park assist system is switched
o.
●
OR: to temporarily deactivate the manoeuvre
braking function, press the
function button
on the park assist scr
een and change the set-
ting.
Loading ...
Loading ...
Loading ...