Loading ...
Loading ...
Loading ...
124
Air conditioning
The range of the control is considerably less in
poor w
eather conditions, if there are buildings
in the vicinity or if the battery is low.
Changing the remote control battery
If the indicator lamp does not come on, the re-
mote control's battery must be replaced.
●
Insert a suitable tool, e.g. a screwdriver, into
the indentation in the remote control housing, in
the direction of the arrow ›››Fig.95.
●
With the help of the same tool, lift the lid until
the housing locking element is released.
●
Slightly move the cover in the direction of the
arrow.
●
Remove the cover.
●
To remove the battery, carefully insert a tool
like a screwdriver into the indentation next to
the battery.
●
Use the screwdriver to lift up the battery until
it releases from its housing.
●
Remove the old battery.
●
Insert a new battery of the same type and
make sure it clicks into place. When inserting
the battery, make sure that the polarity is cor-
rect.
●
Fit the cover onto the remote control housing.
●
Slide the cover in the direction opposite to the
arrow until it clicks into place ›››Fig.95.
WARNING
Swallowing a battery with a 20 mm diameter
or any other butt
on battery can cause seri-
ous and even fatal injuries within a very short
time.
●
Always keep the remote control, keyrings
with batteries, the spare batteries, button
batteries and all other batteries over 20 mm
out of reach of children.
●
If you suspect that someone may have
swallowed a battery, seek immediate medi-
cal attention.
NOTICE
●
The radio frequency remote control con-
t
ains electronic components. Therefore,
avoid getting it wet and exposing it to knocks
or direct sunlight.
●
The use of inappropriate batteries may
damage the radio frequency remote control.
For this reason, always replace the used bat-
tery with another of the same voltage, size
and specifications.
For the sake of the environment
●
Please dispose of your used batteries cor-
r
ectly and with respect for the environment.
●
The remote control battery may contain
perchlorate. Observe the legal provisions re-
garding disposal.
●
Care should be taken so as not to operate
the remote control unintentionally so as to
prevent the auxiliary heater being switched
on accidentally.
Programming the auxiliary heater
Before programming it, check that the vehicle's
date and time are set correctly›››
.
The auxiliary heat
er is programmed in the Aux-
iliary heater menu of the infotainment sys-
tem.
Set the operating duration of the auxiliary
heating
●
Open the Auxiliary heater menu.
●
Press the Set function butt
on.
●
To set the operating time, press the Operat-
ing duration butt
on.
The set operating duration is taken into account
when the auxiliary heating is switched on using
the immediate heat button
or the remote
contr
ol.
The maximum duration of the auxiliary heating
is 60 minutes.
Loading ...
Loading ...
Loading ...