Loading ...
Loading ...
Loading ...
104
Lights
Turning on the “Leaving home” light
●
Switch the ignition o.
The “L
eaving Home” light turns on if the light
control is in position
and the light sensor
det
ects darkness.
The lights-o delay countdown starts when the
last door or rear lid of the vehicle is closed.
Turning o the “Leaving home” light
●
It switches o automatically after the set
lights-o delay time has elapsed.
●
EITHER: it is automatically deactivated if, 30
seconds after the function has been activated,
any vehicle door or the rear lid is still open.
●
OR: rotate the light switch to position
.
●
OR: s
witch on the ignition.
Welcome light
The welcome light is a light located on the exte-
rior mirrors facing the ground which is switched
on or o if the lights control is in the
posi-
tion and the “Coming Home
” or “Leaving Home”
function is switched on or o.
“Coming home” and “Leaving home” set-
tings
The duration of the lights-o delay can be set
in the vehicle settings menu of the infotainment
system, where the function can also be activa-
ted and deactivated ›››page35.
Dynamic headlight range control
The headlight r
ange is automatically adjusted
according to the vehicle load status when they
are switched on.
WARNING
If the dynamic headlight range control fails
or does not w
ork properly, the headlights
could dazzle and distract other road users.
This could cause accidents and lead to seri-
ous injuries.
●
Immediately go to a specialist workshop
and have the headlight range control system
checked.
Driving abroad
The light beam of the dipped beam lights is
asymmetric: the side of the road on which you
are driving is lit more intensely.
When a car that is manufactured in a country
that drives on the right travels to a country that
drives on the left (or vice versa), it is normally
necessary to cover part of the headlight bulbs
with stickers or to change the adjustment of the
headlights to avoid dazzling other drivers.
In such cases, the regulations specify certain
light values that must be complied with for des-
ignated points of the light distribution. This is
known as “Tourist light”.
The light distribution of the headlights allows
the specific “t
ourist light” values to be met
without the need for stickers or changes being
made to the settings.
Note
“Tourist light” is only allowed temporarily. If
you ar
e planning a long stay in a country that
drives on the other side, you should take the
vehicle to an Authorised Technical Service to
change the headlights.
Interior lights
Lighting of the instrument cluster,
displays and controls
The brightness of the instrument and control
lighting can be adjusted in the infotainment
system:
●
Select
> Settings > Lighting >
Vehicle interior lighting; OR
>
Interior settings > Lighting > In-
strument cluster.
The set int
ensity automatically adapts to
changes in ambient brightness in the vehicle.
When the automatic dipped beam light
is turned on, a sensor automatically turns the
dipped beam light on or o, as w
ell as the in-
strument and control lighting, depending on the
ambient brightness.
Loading ...
Loading ...
Loading ...