Loading ...
Loading ...
Loading ...
Parking and manoeuvring
189
Parking aid Plus
1)
The RVC button will only be displayed when reverse gear is engaged.
●
If you use high-pressure or vapour equip-
ment f
or cleaning, do not apply it directly,
unless you do so very briefly, and always
keep a distance of more than 10 cm away.
●
Fitting certain accessories to the front of
the vehicle, such as a plate holder with ad-
vertising, may interfere with the operation of
the Park Assist.
●
We recommend that you practice parking
in an area without trac.
●
The volume and tone of the signals and
indications can be changed.
●
Please observe information on towing a
trailer.
Operating Park Assist Plus
Fig.134 Centr
e console: parking aid button
(depending on the version).
Switching on and o manually
●
Press the
button once.
Automatic activation
●
Select reverse gear.
●
EITHER: if you driv
e forward at a speed of less
than 15 km/h (9 mph) and an obstacle is en-
countered, it is detected when it is approx. less
than 95 cm. away. If the automatic connection
is activated, a reduced view is shown.
●
OR: if the vehicle moves backwards.
When the Plus Parking Aid connects automat-
ically, a diagram of the vehicle and the seg-
ments will appear on screen.
It only operates every time the speed drops be-
low 15 km/h (9 mph) for the first time.
Automatic activation of park assist can be
switched on and o in the infotainment system:
●
Switch the ignition on.
●
In the infotainment system, select
> Set-
tings > Parking and manoeuvring.
●
Check the Automatic activation bo
x.
●
OR, in the parking assist
ance function, select
Settings > Automatic activation.
If activated automatically, an audible sound
warning will only be given when obstacles in
front are at a distance of less than 50 cm. ap-
prox.
If it is switched o using the
button, one of
the f
ollowing actions must be taken for it to re-
activate automatically:
●
Switch o the ignition and switch it on again.
●
EITHER:drive forward at over approx. 15km/h
(9mph).
●
OR: move the lever into position P and back
again.
●
OR: switch the automatic activation on and
o in the Infotainment system.
Automatic disconnection
●
Drive forward at 15 km/h (9mph) or faster.
●
OR: move the selector lever to position P.
Temporary sound suppression
●
Press the
function button on the infotain-
ment scr
een.
Change from reduced view to full view
●
Select reverse gear.
●
Press the car icon on the reduced view
Switch to the reverse assist image (Rear
View Camera “RVC”)
●
Select reverse gear.
●
OR pr
ess the RVC function button
1)
.
A short confirmation signal will be heard and
the button symbol will light up when the system
is switched on.
Loading ...
Loading ...
Loading ...