Loading ...
Loading ...
Loading ...
English - 10 -
First Time Installation (depending on the model)
Note: ,f \ou are going to perform F5A16A7 installation insert
the F5A16A7 card (optional) into the &onditional Access
terminal of \our 79 before switching on \our 79.
When turned on for the first time, the language
selection screen is displayed. Select the desired
language and press OK.
On the next screen, set your preferences using the
directional buttons.
Note: Depending on the Country selection \ou ma\ be asNed
to set and con¿rm a P,1 at this point. 7he selected P,1 cannot
be . You have to enter it if \ou are asNed to enter a P,1
for an\ menu operation later.
About Selecting Broadcast Type
Digital Aerial: If Digital Aerial broadcast search
option is turned on, the TV will search for digital
terrestrial broadcasts after other initial settings are
completed.
Digital Cable: If Digital Cable broadcast search
option is turned on, the TV will search for digital cable
broadcasts after other initial settings are completed.
According to your other preferences a con¿rmation
message may be displayed before starting to search.
Select YES and press OK to proceed. To cancel
operation, select NO and press OK. You can select
Network or set values such as Frequency, Network
ID and Search Step. When ¿nished, press OK button.
Note: Searching duration will change depending on the
selected Search Step.
Satellite (depending on model): If Satellite
broadcast search option is turned on, the TV will
search for digital satellite broadcasts after other initial
settings are completed. Before satellite search is
performed some settings should be made. Before the
satellite search starts, a menu will be displayed where
you can select to start a Fransat installation. Set the
Install Type as Operator and than set the Satellite
Operator as the related Fransat operator. Then press
the OK button to start Fransat installation. You can
select to start an automatic or manual installation.
Press OK to proceed. Fransat Installation will be
performed and broadcasts will be stored (if available).
If you set the Install Type as Standard, you can
continue with regular satellite installation and watch
satellite channels.
You can start a Fransat installation at any time later
from the Installation>Automatic channel scan>
Satellite menu.
There are three types of antenna selection. Antenna
Type menu will be displayed ¿rst. You can select
Antenna Type as Direct, Single Satellite Cable or
DiSEqC switch by using “
” or “ ” buttons.
Direct: If you have a single receiver and a direct
satellite dish, select this antenna type. Press OK to
continue. Select an available satellite on the next
screen and press OK to scan for services.
Single Satellite Cable: If you have multiple
receivers and a single satellite cable system, select
this antenna type. Press OK to continue. Con¿gure
settings by following instructions on the next screen.
Press OK to scan for services.
DiSEqC switch: If you have multiple satellite
dishes and a DiSEqC switch, select this antenna
type. Then set the DiSEqC version and press OK
to continue. You can set up to four satellites (if
available) for version v1.0 and sixteen satellites for
version v1.1 on the next screen. Press OK button
to scan the ¿rst satellite in the list.
Analogue: If Analogue broadcast search option is
turned on, the TV will search for analogue broadcasts
after other initial settings are completed.
Additionally you can set a broadcast type as your
favourite one. Priority will be given to the selected
broadcast type during the search process and the
channels of it will be listed on the top of the Channel
List. When ¿nished, press OK to continue.
A dialogue screen asking to activate parental control
will be displayed. If you select Yes, parental restriction
options will be displayed. Con¿gure as desired and
press OK when ¿nished. Select No and press OK
to advance, if you don’t want to activate parental
restrictions.
You can activate Store Mode option at this point.
This option will con¿gure your TV’s settings for store
environment and depending on the TV model being
used, the supported features of it may be displayed
on the top of the screen as an info banner. This option
is intended only for store use. It is recommended to
select Home Mode for home use. This option will be
available in System>Settings>More menu and can
be turned off/on later.
Depending on the model of your TV and the country
selection Privacy Settings menu may appear at
this point. Using this menu you can set your privacy
privileges. Highlight a feature and use Left and Right
directional buttons to enable or disable. Read the
related explanations displayed on the screen for
each highlighted feature before making any changes.
You can use Programme +/- buttons to scroll up
and down to read the entire text. You will be able to
change your preferences at any time later from the
Settings>Privacy Settings menu. If the Internet
Connection option is disabled Network/Internet
Settings screen will be skipped and not displayed.
Press OK button on the remote control to continue
and the Network/Internet Settings menu will be
displayed, if you con¿rm the previously displayed
message asking whether you want to do the network
settings. Please refer to Connectivity section to
con¿gure a wired or a wireless connection. After the
English - 11 -
settings are completed press OK button to continue.
To skip to the next step without doing anything select
No and press the OK button when the message is
displayed asking whether you want to do the network
settings.
After the initial settings are completed TV will start
to search for available broadcasts of the selected
broadcast types.
After all the available stations are stored, scan results
will be displayed. Press OK to continue. The Edit
Channel List menu will be displayed next. You can
edit the channel list according to your preferences or
press the Menu button to quit and watch TV.
While the search continues a message may appear,
asking whether you want to sort channels according
to the LCN(*). Select Yes and press OK to con¿rm.
(*) /&1 is the /ogical &hannel 1umber s\stem that
organizes available broadcasts in accordance with a
recognizable channel number sequence (if available).
Note: Do not turn off the 79 while initializing ¿rst
time installation. 1ote that some options ma\ not be
available depending on the countr\ selection.
Using SatcoDX Feature (depending on the model)
You can perform SatcoD; operations using the
Installation>Satellite Settings menu. In the
SatcoDX menu, there are two options regarding to
the SatcoD;.
You can download or upload SatcoD; data. In order
to perform these functions a USB device must be
connected to the TV.
You can upload current services and related satellites
& transponders in TV, to a USB device.
Additionally you can download one of the SatcoD;
¿les stored in USB device, to the TV.
When you select one of these ¿les, all services and
related satellites and transponders in the selected
¿le will be stored in the TV. If there are any installed
terrestrial, cable and/or analog services, they will be
kept and only satellite services will be removed.
Afterwards, check your antenna settings and make
changes if necessary. An error message stating “No
Signal” may be displayed if the antenna settings are
not con¿gured properly.
Media Playback via USB Input
You can connect .´ and 3.´ inch (hdd with e[ternal
power suppl\) e[ternal hard disN drives or 8S%
memor\ sticN to \our 79 b\ using the 8S% inputs
of the 79.
IMPORTANT! Back up the ¿les on your storage devices
before connecting them to the TV. Manufacturer will
not be responsible for any ¿le damage or data loss.
Certain types of USB devices (e.g. MP3 Players)
or USB hard disk drives/memory sticks may not be
compatible with this TV. The TV supports FAT32
and NTFS disk formatting but recording will not be
available with NTFS formatted disks.
While formatting USB hard drives which have
more than 1TB (Tera Byte) storage space you may
experience some problems in the formatting process.
Wait a little while before each plugging and unplugging
as the player may still be reading ¿les. Failure to do
so may cause physical damage to the USB player
and the USB device itself. Do not pull out your drive
while playing a ¿le.
You can use USB hubs with your TV’s USB inputs.
External power supplied USB hubs are recommended
in such a case.
It is recommended to use the TV’s USB input(s)
directly, if you are going to connect a USB hard disk.
Note :hen viewing image ¿les the 0edia %rowser
menu can onl\ displa\ image ¿les stored on the
connected 8S% device.
Timeshift Recording(depending on the model)
Press Pause button while watching a broadcast to
activate timeshifting mode. In timeshifting mode, the
programme is paused and simultaneously recorded
to the connected USB disk.
Press Play button again to resume the paused
programme from where you stopped. Press the Stop
button to stop timeshift recording and return to the live
broadcast.
Timeshift cannot be used while in radio mode.
You cannot use the timeshift fast reverse feature
before advancing the playback with the fast forward
option.
Instant Recording(depending on the model)
Press Record button to start recording an event instantly
while watching a programme. You can press Record
button on the remote control again to record the next
event on the EPG. In this case, an OSD will be displayed,
indicating the programmed events for recording. Press
Stop button to cancel instant recording.
You can not switch broadcasts or view the media
browser during the recording mode. While recording
a programme or during the timeshifting, a warning
message appears on the screen if your USB device
speed is not suf¿cient.
Loading ...
Loading ...
Loading ...