D-Link DBA-2820P Nuclias Wireless AC2600 Cloud-Managed Access Point

Enter the ID of the native VLAN the port belongs to.

Enter the IDs of the VLANs that can route traffic through this port. Enter All to allow

all traffic from all VLANs to pass through this port.

Enter a descriptive tag for the port. Multiple tags can be entered. If multiple ports are

selected, any tags will be applied to all ports.

Choose the maximum link speed of the port. Select Auto to allow the port to auto-

Creating a Switch Port Schedule section.

Aggregating Multiple Switch Profile Ports

Port aggregation allows users to link multiple physical ports together as one logical link to increase port bandwidth and

redundancy in the event of a single physical link failure. Ports can be aggregated using either LACP or static link.

Note: Port aggregation is not supported if the port type is set to “Access”. To configure the port type, refer to the

Settings for One or More Switch Ports section for more information.