Loading ...
Loading ...
Loading ...
76
9.2 RFID Calibration
The TJ-4021TNR and TJ-4121TNR have a fixed-position RFID antenna mounted at the Media
Output Slot, which supports a wide variety of tag types.
9.2.1 Load the RFID Media
1. Load the RFID media onto the Label Supply Spindle.
2. Open the Print Head and RFID Tear Cover. Thread the media through the Damper, Media
Sensor, and Front Label Guide to install the media.
3. Feed the RFID media through the Tear Cover Slot.
4. Move the media sensor by adjusting the Media Sensor Position Adjustment Knob. Make
sure the position of the Gap or Black Mark Sensor matches the position of the Gap/Black
Mark on the label roll.
5. Adjust the Front Label Guide to fix the media position.
6. Close the Print Head and RFID Tear Cover.
RFID Tear Cover
Loading ...
Loading ...
Loading ...