Loading ...
Loading ...
Loading ...
45
6. Operation
6.1 Power-on Utilities
There are various power-on utilities to set up and test the printer's functions.
TJ-4005DN/TJ-4010TN/TJ-4020TN/TJ-4120TN
Use the power-on utilities to calibrate sensors and initialize the hardware.
Function Instructions
Gap/Black Mark
Sensor Calibration
1. Turn off the printer.
2. Press and hold the Pause Button, and then turn on the Power
Switch.
3. Release the button when the Power LED lights, and the printer
feed
the labels.
Self-test
1. Turn off the printer.
2. Press and hold the Feed Button, and then turn on the Power
Switch.
3. Release the button when the Power LED lights, and the printer
feeds the labels.
Printer initialization
1. Turn off the printer.
2. Press and hold both the Pause and Feed Buttons, and then turn on
the Power Switch.
3. Release the buttons when the Power LED lights.
Note
When printer initialization is complete, calibrate the Gap Sensor
again.
TJ-4021TN/TJ-4021TNR/TJ-4121TN/TJ-4121TNR
Use power-on utilities to set sensor calibration, self-test, and factory default functions.
1. Turn off the label printer.
2. Press and hold the right Selection button, and then turn on the Power Switch.
3. Release the button when the function you want to set or test appears on the
Touchscreen.
Loading ...
Loading ...
Loading ...