Brother TJ-4020TN

User Manual - Page 72

For TJ-4020TN.

PDF File Manual, 94 pages, Read Online | Download pdf file

TJ-4020TN photo
Loading ...
Loading ...
Loading ...
68
Item
Description
Diagnostics
Read USR
Reads the User Memory bank of the tag in range of the
internal RFID coupler and reports the data to the debug
port and displays it on the Touchscreen. It is primarily
intended for development verification by checking that the
system is working.
Note
This setting does not position the RFID tag over the
coupler. Make sure to position the tag over the coupler
to receive an accurate reading.
Read TID
Reads the Tag ID (TID) from the tag in range of the
internal
RFID coupler and displays the value read in the Tag ID
menu.
Note
This setting does not position the RFID tag over the
coupler. Make sure to position the tag over the coupler
to receive an accurate reading.
Tag ID
Displays the first Tag ID (TID) read since power-up, or if
using the Read TID menu, the most recently read TID. If no
tag is in range of the internal RFID coupler, “Unknown”
appears on the Touchscreen.
Read PC
Reads the PC (Protocol Control) field from an RFID tag in
range of the internal RFID coupler and displays the value
read in the Tag PC menu.
Note
This setting does not position the RFID tag over the
coupler. Make sure to position the tag over the coupler
to receive an accurate reading.
Tag PC
Displays the last PC (Protocol Control) field read from an
RFID tag. If no tag is in range of the internal RFID coupler,
“Unknown” appears on the Touchscreen.
Write EPC
with 1s
Writes all ones to the tag in range of the internal RFID
coupler. It is primarily intended for development verification
by checking that the system is working.
Note
This setting does not position the RFID tag over the
coupler. Make sure to position the tag over the coupler
to receive an accurate writing.
Write EPC
with 2s
Writes all twos to the tag in range of the internal RFID
coupler. It is primarily intended for development verification
by checking that the system is working.
Note
This setting does not position the RFID tag over the
coupler. Make sure to position the tag over the coupler
to receive an accurate writing.
Loading ...
Loading ...
Loading ...