Loading ...
Loading ...
Loading ...
a Dropping the Feed Dogs
The drop feed lever is located underneath the free arm bed on the back
side of the machine,
(_ To raise the teed dogs, push the (_) To drop the feed dogs, push the
tever in the direction of the arrow, lever in the direction ol the
as illustrated, arrow, as illustrated.
Then turn the handwheeL
* Feed dogs must always be up for normal sewing.
Set the Machine
Stitch wldlh conlrol 0
t
1
Stitch length
control any number
teat necessary to
adjust)
Top thread
tension
eontret 2 _o6
F: Satin stitch tool -_.,
Drop teed lever
o Darning
1. Drop the teed dogs.
2. Place the fabric, with the hole in the center,
on an between embroidery hoop, as shown.
3. Lower the presser bar and sew at a slow speed.
4. Move the tabnc back and forth slowly until you
have covered the darning area.
5, Turn the fabric 1/4 turn and sew another layer of
stitching over the first layer.
NOTE: If your tabric is thin or badly damaged
use a separate piece of fabric under the
hole to reinforce it.
6. When you finish darning, return the pressure
adjusting lever to 3.
62
Loading ...
Loading ...
Loading ...