Loading ...
Loading ...
IMPORTANT SAFETY
INSTRUCTIONS
Your sewing machine is designed and constructed only for HOUSEHOLD use.
Read all instructions betore using this sewing machine.
DANGER --Toreducethe risk of electric shock:
1. A sewing machine should never be left unattended when plugged in. Always
unplug this sewing machine from the electric outlet immediately after using
and before cleaning.
2, Always unpiug before replacing sewing machine bulb. Replace bulb with
same type rated 15 Watts.
3. Do not reach lor a sewing machine that has tailen into water. Unplug
immedlate_y
4. Do not place or store sewing machine where it can tall or be pulled into a tub
or sink. Do not place or drop into water or other liquid.
WARNING--To reduce the risk of burns, fire, electric shock, or niury
to persons.
1. Do not aflow to be used as a toy. Close attention is necessary, when this
sewing machine is used by or near children.
2. Use this sewing machine only for its intended use as described inthis manual
Use only attachments recommended by the manufacturer as contained in
this manual
3. Never operate this sewing machine if it has a damaged cord or plug, if it is not
working properly, if it has been dropped or damaged, or dropped into water,
Return the sewing machine to the nearest authorized deaJeror service center for
examination, repair, electrical or mechanical adjustment.
4. Never operate the sewing machine with any air opening blocked. Keep ventilation
openings of the sewing machine and toot controller tree trom accumulation
of lint, dust, and loose cloth.
5. Never drop or insert any obiect into any opening,
6. Do not use outdoors.
7. Do not operate where aerosol (spray) products are being used or where
oxygen is being administered.
8. To disconnect, turn all controls to the off ("0 °') position, then remove plug
from outlet.
9. Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
10, Keep fingers away from all moving parts. Special care is required around
the sewing machine needle.
11. Always use the proper needle plate. The wrong plate can cause the needle
to break.
12. Do not use bent needles.
t3. Do not pull or push fabric while stitching. It may deflect the needle causing it
to break.
14. Switch the sewing machine off ("0") when making any adjustment in the
needle area, such as threading needle, changing needle, threading bobbin,
or changing presser toot: and the like.
15. Always unplug the sewing machine trom the electrical outlet when
removing covers, lubricating, or when making any other adjustments
mentioned in the instruction manual.
SAVE THESE INSTRUCTIONS
Loading ...
Loading ...
Loading ...