Loading ...
Loading ...
Loading ...
138
Notice when scanning long page document:
1. Pull out the extension in the ADF Paper Tray.
2. Secure enough space around the Output Tray to prevent the ejected paper
from falling off the Output Tray.
3. To ensure the performance, in color mode, set the resolution to be 300 dpi or
lower; in Black and White mode, set the resolution to be 600 dpi or lower.
4. Depending on your system environments, application, or your specified paper
size, there may be insufficient memory to perform scanning.
OverScan
Overscan allows you to add a specific margin at top and bottom or right and left
(Options vary based on the type of scanner) of the edge of the image. This is
used to reduce possible corner clipping on the skewed images and often applied to
a batch of skewed document to be scanned in the auto document feeder. Select
a value between 0 and +5 mm. Note the overscan result will not be shown in
the Display window and that the availability of the function varies based on type
of scanner.
Pre-Feed
Choice: Enable, Disable. If enable is selected, you can set the amount of time
the scanner starts pre-feeding your paper after your documents has been loaded
into the feeder. The default is disable. Note: The availability of this option varies
due to scanner model.
Transport Timeout
Set the amount of time the scanner will wait and then start auto scan after the
first scan job is completed. If you have many separate documents need to be
scanned at the same scan settings, this feature is especially useful. The default is
0. The value ranges from 0 to 30 seconds.
Note:
1. Within the specified timeout period, if you load your document to the feeder,
the scanner starts scanning automatically.
2. If your scanner has a flatbed option and you place your paper on the flatbed,
after the timeout period, you need to click the Scan button on the TWAIN
user interface to start scanning.
Loading ...
Loading ...
Loading ...