Loading ...
Loading ...
Loading ...
133
The Adjustment option is available when Automatic is selected.
Adjustment —adds a positive/negative margin value Top/Bottom or
toward left/right of the image. Adjustment is used when the automatic
document feeder is used. Adjustment reduces the possibility of corner
clipping on skewed images. To set Adjustment values, use the UP/Down
buttons to select where you want to apply Adjustment values: Top/Bottom
or Left/Right, and then select the amount of inches/mm/pixels applied.
Select a value within the range of 0.00 to 1.00 / -1.00.
Relative to Document: (used for batches of same-sized documents)
This option allows you to crop different areas on your documents and deliver
these images in B&W, Gray, or Color separately. For example, there are
applications which require you to store the entire document in B&W and a part
of the document in color to save storage space. This is useful for documents
where a photograph or signature appears in a consistent area on the document
such as resumes, and so on.
The following procedure describes how to reproduce the entire document in
B&W and a portion of document (picture) in color.
1. On the Paper tab, choose “Relative to Document” or “Fixed to Transport”
from the Cropping option.
2. Choose your scan size from the Scan Area option. The selected scan size
will be displayed in a red rectangular box. This is also the scan size of
your entire document. (For example, ISO B5. If you have not chosen a
scan area and leave the selection as None, then the default area will be
the scanner’s maximum.)
A red rectangular box
Loading ...
Loading ...
Loading ...