Loading ...
Loading ...
Loading ...
Changing
Oven and / or
Cooktop Lights
(if equipped)
Be sure the oven is unplugged and all parts are COOL before replacing
the oven light bulb. Do not turn the oven light on during a self-cleaning cycle. High
temperature will reduce lamp life.
To Change the Oven Light
The oven light automatically turns on when the door is opened (some models). To turn the
oven light on and off when the door is closed, use the OVEN LIGHT switch located in the con-
trol panel.
1. Turn electrical power off at the main source or unplug the oven.
2. Wear a leather-faced glove for protection against possible broken glass.
3. Presswire holder to one side to release the glass shield.
4. Replace bulb with a new 40 watt appliance bulb.
5. Replace glass shield in socket and snap wire holder into place.
6. Turn power back on again at the main source (or plug the appliance back in).
7. The clock will then need to be reset. To reset, see Setting the Clock and Minute Timer in
the Electronic Oven Control Guide.
To Change the Cooktop Light (If equipped)
Your model will either have a canopy cover that lifts up or 2 phillips head screws that secure
the light cover. BEFORECHANGING THE COOKTOP LIGHT,BESURETO TURNTHE POWEROFF
AT THE MAIN SOURCEOR UNPLUG THE RANGE.
For models with a canopy cover that lifts up, follow these instructions:
1. Grasp the front edge of the canopy cover as illustrated in the side column. Pull forward and
lift the cover up and off toward rear of range.
2. Remove bulb by rolling up and out. Install the new bulb by sliding down into place and roll-
ing toward front of range.
3. Align front edge of light cover with inside lip of end cap. Lower rear of cover into place
and snap down.
4. Turn power back on at the main source (or plug the range back in).
Adjusting
Right Oven
Temperature
To adjust the right oven temperature, refer to the Electronic Oven Control Guide.
12
Loading ...
Loading ...
Loading ...