Loading ...
Loading ...
Loading ...
Surface Cooking
FEATURE OVERVIEW
• Placement of Burner Grates
Setting Surface Controls
Grate
Burner pan
lip
top
Placement of Burner Grates
Place grate over burner pans. Make sure that the groove under grate fits
over the raised lip of the burner pan. The rounded corners of the grates
should be placed toward the front of the cooktop for the front burners
and the rear of the cooktop for the back burners.
Setting Surface Controls
Your cooktop may be equipped with any combination of the following
burners:
Simmer Burner; this burner is best used for simmering delicate sauces, etc.
Standard Burner; can be used for most all surface cooking needs.
Large Burner; the larger burner is best used when bringing large
quantities of liquid to temperature and when preparing larger quantities
of food.
Regardless of size, always select a utensil that is suitable for the amount
and type of food being prepared. Select a burner and flame size
appropriate to the pan. Never allow flames to extend beyond the outer
edge of the pan.
Do not place plastic items such as salt and pepper shakers,
spoon holders or plastic wrappings on top of the cooktop when it is in
use. These items could melt or ignite. Potholders, towels or wood spoons
could catch fire if placed too close to a flame.
To operate the surface burner:
1. Place cooking utensil on burner.
2. Push in and turn the Surface Control knob to LITE. Note: All electronic
ignitors will click at the same time. However, only the burner you are
turning on will ignite.
3. Visually check that the burner has lit.
4. Push in and turn the Surface Control Knob to the desired flame size.
The control knobs do not have to be set at a particular mark. Use the
guides and adjust the flame as needed. DO NOT cook with the Surface
Control knob in the LITE position. (The electronic ignitor will continue
to click if left in the LITE position, causing premature wear.)
In the event of an electrical power outage, the surface burners can be lit
manually. To light a surface burner, hold a lit match to the burner head,
then slowly turn the Surface Control knob to LITE. Use caution when
lighting surface burners manually.
10
Loading ...
Loading ...
Loading ...