Huawei HG8145V5 User Guide

Loading ...

1/13/2020 HedEx Startpage

localhost:7890/printtopics.html?time=Mon Jan 13 2020 13:54:48 GMT+0100 (Central European Standard Time) 72/86

Parameter Description

Enable Echo Cancellation Echo is mainly produced in the PSTN user, the echo of user port allows remote users feel the affects call quality

and.

Fax Transmode The fax can be divided into fax pass through (G.711), T.38 fax (T.38 encoding).

Fax Switch Mode Whether to participate in the SIP signaling, fax type can be divided into consultations fax, since switching the

fax.

Profile Index The system has built-in universal profile index, if does not meet the demand, according to the actual specific

configuration Profile index.

Profile Parameters If the profile index is User-defined, configure the profile parameter according to actual configurations.

Soft Parameter Select the default software parameters.

Start Negotiate Version H.248 version of the negotiations based on the profile parameter.

Digitmap Start Timer Indicates the start timer of the digitmap. This timer starts up when a user picks up the phone and hears the dialing

tone. If the user does not dial digits within the time specified by the timer, the call is released.

Digitmap Short Timer Indicates the short timer of the digitmap. This timer starts up if a number that matches digitmap A is dialed and

then matches digitmap B.

Digitmap Long Timer Indicates the long timer of the digitmap. This timer starts up if the dialed digits comply with the dialing scheme

but one more digit is required.

NOTE:

Physical Interface Parameters and Advanced User Parameters specify the POTS port physical parameters and the parameter names use the standard terms, which are unnecessary

to be described here.

Parent Topic: Voice

< Previous topic Next topic >

1.6.8.3 SIP/H.248 Protocol Conversion

Click the Advanced Configuration > Voice tab, and choose SIP/H.248 Protocol Conversion from the navigation tree on the left.

1. In the right pane, you can change the VoIP protocol (SIP or H.248) by changing the value of the Voice parameter, as shown in Figure 1.

Figure 1 SIP/H.248 Protocol Conversion

NOTE:

Exercise caution when performing this operation because it will interrupt the ongoing call and delete current data.

2. Click Apply.

Parent Topic: Voice

< Previous topic

1.6.9 System Management

This topic describes how to Manage the system on the Web page, including the configuration of TR-069, Account Management and ONT

Authentication.

TR-069

Account Management

Open Source Software Notice

ONT Authentication

Parent Topic: Advanced Configuration

Loading ...

Huawei HG8145V5 Terminal Router

User Guide - Page 72