Loading ...
Loading ...
Loading ...
1/13/2020 HedEx Startpage
localhost:7890/printtopics.html?time=Mon Jan 13 2020 13:54:48 GMT+0100 (Central European Standard Time) 31/86
Figure 1 Default IPv4 Route Configuration
NOTE:
If an ONT fails to find a matching routing entry after receiving a packet, the WAN interface specified by the default route configuration sends the packet to a network
device. Before the default route of the system is enabled, the WAN interface must obtain the IP address. Therefore, the parameters of the WAN interface must be
correctly set. For details, see WAN Configuration.
2. Click Apply.
Parent Topic: Route
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
Next topic >
1.6.4.2 IPv4 Static Route Configuration
1. In the navigation tree on the left, choose Advanced Configuration > Route > IPv4 Static Route Configuration. In the pane on the right,
click New. In the dialog box that is displayed, set the parameters related to the static route, as shown in Figure 1.
Figure 1 IPv4 Static Route Configuration
2. Click Apply.
Table 1 describes the parameters related to the static route.
Table 1 Parameters related to the static route
Parameter Description
Address Format Indicates the format of an address, which can be in IP address or domain name format. When both the destination
IP address and the domain name are configured, only the destination IP address takes effect.
IP Address Indicates the destination IP address of the static route. This parameter must be configured when the IP address
format is specified for Address Format.
Domain name Indicates the domain name of the static route. This parameter must be configured when the domain name formats
is specified for Address Format.
The wildcard domain names in the following formats are supported: *.abc.com, abc.com.*, and abc.*.com. The
wildcard domain names in the following format are not supported: *abc.com, abc*.com, and a*c.com.
Loading ...
Loading ...
Loading ...