Huawei HG8145V5 User Guide

Loading ...

1/13/2020 HedEx Startpage

localhost:7890/printtopics.html?time=Mon Jan 13 2020 13:54:48 GMT+0100 (Central European Standard Time) 32/86

Parameter Description

Subnet Mask Indicates the subnet mask of the static route.

Gateway Indicates the gateway IP address of the static route.

WAN Name Indicates the WAN interface that the route travels through.

Parent Topic: Route

< Previous topic Next topic >

1.6.4.3 IPv4 Dynamic Route Configuration

1. In the navigation tree on the left, choose Advanced Configuration > Route > IPv4 Dynamic Route Configuration. In the pane on the

right, click New. In the dialog box that is displayed, set the parameters related to the dynamic route, as shown in Figure 1.

Figure 1 IPv4 Dynamic Route Configuration

2. Click Apply.

Table 1 describes the parameters related to the dynamic route.

Table 1 Parameters related to the dynamic route

Parameter Description

Enable RIP Controls whether the RIP function configured on the WAN port takes effect.

Protocol Type Indicates the RIP protocol type. It is used for dynamic route learning and route advertisement.

RIPv1: does not support packet authentication. When this protocol type is selected, the authentication

mode automatically changes to None.

RIPv2: supports packet authentication.

RIPv1_v2: supports both RIPv1 and RIPv2.

Mode Indicates the RIP protocol working mode. Its values are Active and Passive.

Active: advertises and automatically learns routes.

Passive: only automatically learns routes but does not advertise routes.

Authentication Mode Indicates the packet authentication mode. It is used for authentication on route learning and advertisement

packets.

When RIPv1 is selected, the authentication mode cannot be edited and is set to None.

When RIPv1_v2 is selected, the authentication mode works for only RIPv2 and RIPv1 packets are not

authenticated.

Key Indicates the key required for packet authentication.

It cannot be set if the authentication mode is None.

It is mandatory if the authentication mode is Plaintext, MD5, or HMAC-SHA256.

NOTE:

When the authentication mode is Plaintext, the input plaintext is displayed as asterisks (*).

Interface Name Indicates the name of a WAN port, which is used to associate a port configured using a dynamic route. By

default, it is the name of every WAN port.

Loading ...

Huawei HG8145V5 Terminal Router