Loading ...
Loading ...
Loading ...
1/13/2020 HedEx Startpage
localhost:7890/printtopics.html?time=Mon Jan 13 2020 13:54:48 GMT+0100 (Central European Standard Time) 16/86
Figure 3 WAN Configuration - bridge
2. Click Apply.
Table 2 describes the parameters related to the WAN in bridge mode.
Table 2 Parameters related to the WAN in bridge mode
Parameter Description
Enable WAN Connection Indicates whether to enable the WAN connection.
Encapsulation Mode Indicates the encapsulation mode of a WAN interface. It can be set to IPoE or PPPoE.
Protocol Type Indicates the protocol type of a WAN interface. It can be set to IPv4, IPv6, or IPv4/IPv6 dual stack.
Mode Indicates the WAN interface mode. It can be set to Bridge WAN or Route WAN.
Service List Indicates the service type of the WAN interface. It is always set to INTERNET.
Enable VLAN Selects this check box to set VLAN ID and 802.1p priority.
VLAN ID Indicates the VLAN ID. It ranges from 1 to 4094.
The VLAN ID must be the same as the C-VLAN ID on the OLT.
802.1p policy Indicates the 802.1p priority policy.
Use specified value: indicates that a specified priority value is used. If you select this option, you need to set the
802.1p parameter.
Copy from IP precedence: indicates that the priority is copied from the ToS field in the IP header of the user-
side packets. If the received packet is not an IP packet or the packet does not carry the 802.1p priority, the
default 802.1p priority is used. If you select this option, you need to set the Default 802.1p parameter.
Dscp Pbit Mapping: indicates the priority displayed in the DSCP to 802.1p mapping table. The DSCP field is in
the IP header of the user-side packets. If the received packet is not an IP packet or the packet does not carry the
802.1p priority, the default 802.1p priority is used. If you select this option, you need to set the Default 802.1p
parameter.
Binding options Used to bind the WAN interface to the LAN port or to the wireless SSID.
NOTE:
Before setting the binding options, set the work mode of the LAN port to route or set the wireless SSID. The binding options can be
set only after the work mode or wireless SSID is successfully set. For details, see Layer 2/3 Port Configuration, 2.4G Basic Network
Settings and 5G Basic Network Settings.
Loading ...
Loading ...
Loading ...