Loading ...
Loading ...
Loading ...
1/13/2020 HedEx Startpage
localhost:7890/printtopics.html?time=Mon Jan 13 2020 13:54:48 GMT+0100 (Central European Standard Time) 19/86
Figure 1 DHCP Server Configuration
2. Click Apply.
Table 1 describes the parameters related to the DHCP server.
Table 1 Parameters related to the DHCP server
Parameter Description
Enable primary DHCP server Indicates whether to enable the primary DHCP server. If the check box is
selected, you can set the primary DHCP server.
Enable DHCP L2 Relay Indicates whether to enable the DHCP L2 Relay.
The DHCP relay is a process in which cross-subnet forwarding of DHCP
broadcast packets is implemented between the DHCP client and the DHCP
server. In this manner, the DHCP clients in different physical subnets can obtain
IP addresses which are dynamically allocated from the same DHCP server.
If Mode of the WAN port is Route, the IP address of the ONT is
obtained from upper-layer DHCP servers in different subnets and the
user-side IP addresses are obtained from the DHCP address pool of the
ONT.
If Mode of the WAN port is Bridge, the ONT functions as a bridge. In
this way, the ONT does not have an IP address. The user-side IP
addresses are obtained from upper-layer DHCP servers in different
subnets.
Start IP Address Indicates the start IP address in the IP address pool on the primary DHCP server.
End IP Address Indicates the end IP address in the IP address pool on the active DHCP server.
Loading ...
Loading ...
Loading ...