Loading ...
Loading ...
Loading ...
1/13/2020 HedEx Startpage
localhost:7890/printtopics.html?time=Mon Jan 13 2020 13:54:48 GMT+0100 (Central European Standard Time) 25/86
Parameter Description
Filter Mode Indicates the IP address filter rule of the blacklist or whitelist.
Blacklist: indicates that the data meeting the rule in the filter rule list is not allowed to pass.
Whitelist: indicates that the data meeting the rule in the filter rule list is allowed to pass.
Hybrid: indicates that packets are filtered based on the upstream or downstream direction. Certain IP
packets in the upstream or downstream direction are (not) allowed to pass through.
Only one of the preceding modes can be selected.
Protocol Indicates the type of the protocol, which may be TCP/UDP, TCP, UDP, ICMP, or ALL.
Priority Indicates the Priority of the IP address.When Filter Mode is selected in the hybrid mode,this parameter can be
configured.
Range:0–255.
Direction Indicates the direction to which the filter rule applies.
Bidirectional: This value is available only when Filter Mode is Blacklist or Whitelist. The value
cannot be changed.
Upstream: When this value is selected in the hybrid mode, the filter rule applies to the upstream
direction. In the hybrid filter mode, only Upstream or Downstream can be selected.
Downstream: When this value is selected in the hybrid mode, the filter rule applies to the downstream
direction.
LAN-side Start IP Address Indicates the start IP address on the LAN side.
LAN-side End IP Address Indicates the end IP address on the LAN side.
LAN-side TCP Port Indicates the port ID on the LAN side. This parameter can be configured when Protocol is set to TCP/UDP or
TCP.
LAN-side UDP Port Indicates the port ID on the LAN side. This parameter can be configured when Protocol is set to TCP/UDP or
UDP.
WAN-side IP Address Indicates the IP address on the WAN side.
WAN-side TCP Port Indicates the ID of the WAN side port. This parameter can be configured when Protocol is set to TCP/UDP or
TCP.
WAN-side UDP Port Indicates the ID of the WAN side port. This parameter can be configured when Protocol is set to TCP/UDP or
UDP.
Action Indicates the IP filter action. When Filter Mode is selected in the hybrid mode,this parameter can be configured.
Accept: accepts packets that meet the IP filter rule.
Drop: drops packet that meet the IP filter rule.
Parent Topic: Security Configuration
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >
1.6.3.3 MAC Address Filtering
1. Click Advanced Configuration > Security Configuration tab, and choose MAC Address Filtering in the navigation tree on the left. In
the pane on the right, after enabling MAC filter and selecting the filter mode, click New. On the dialog box that is displayed, configure the
MAC filter rule for the PC to access the Internet, as shown in Figure 1.
Figure 1 MAC Address Filtering
2. Click Apply.
Loading ...
Loading ...
Loading ...