Loading ...
Loading ...
Loading ...
1/13/2020 HedEx Startpage
localhost:7890/printtopics.html?time=Mon Jan 13 2020 13:54:48 GMT+0100 (Central European Standard Time) 13/86
Figure 2 WAN Configuration - route(IPv6)
2. Click Apply.
All data associated with the WAN will be deleted after you delete the WAN port configuration. Exercise caution when you perform this operation.
Table 1 describes the parameters related to the WAN in route mode.
Table 1 Parameters related to the WAN in route mode
Parameter Description
Enable WAN Connection Indicates whether to enable the WAN connection.
Encapsulation Mode Indicates the encapsulation mode of a WAN interface. It can be set to IPoE or PPPoE.
Protocol Type Indicates the protocol type of a WAN interface. It can be set to IPv4, IPv6, or IPv4/IPv6 dual stack.
Mode Indicates the WAN interface mode. It can be set to Bridge WAN or Route WAN.
Service List Indicates the service type of the WAN interface. It can be set to TR069, INTERNET, TR069_INTERNET,
VOIP, TR069_VOIP, VOIP_INTERNET, TR069_VOIP_INTERNET, IPTV, OTHER, VOIP_IPTV,
TR069_IPTV or TR069_VOIP_IPTV.
Enable VLAN Selects this check box to set VLAN ID and 802.1p priority.
VLAN ID Indicates the VLAN ID. It ranges from 1 to 4094.
The VLAN ID must be the same as the C-VLAN ID on the OLT.
Loading ...
Loading ...
Loading ...