Huawei HG8145V5 User Guide

Loading ...

1/13/2020 HedEx Startpage

localhost:7890/printtopics.html?time=Mon Jan 13 2020 13:54:48 GMT+0100 (Central European Standard Time) 60/86

Parameter DescriptionParameter Description

TX Power Indicates the transmit optical power of wireless signals. It can be set to 20%, 40%, 60%, 80%, or 100%. The

larger the value, the better the coverage of wireless signals.

Regulatory Domain Indicates the country code of the wireless network.

Channel Indicates the channel of the wireless network. The channel varies with the value of Regulatory Domain.

Channel Width Indicates the wireless channel width. It can be set to Auto 20/40/80 MHz, Auto 20/40 MHz, 20 MHz or 40

MHz.

Mode Indicates the supported wireless network mode. It can be set to 802.11b, 802.11g, 802.11b/g, or 802.11b/g/n.

DTIM Period Indicates the delivery period of the delivery traffic indication map (DTIM). The value ranges from 1 to 255, and

the default value is 1.

Beacon Period Indicates the delivery period of the beacon. The beacon is used to contact other access point devices or network

control devices. The value ranges from 20 ms to 1000 ms, and the default value is 100 ms.

RTS Threshold Indicates the request to send (RTS) threshold. It is used to avoid conflicts in data transmission in the wireless

LAN.

The smaller the RTS threshold, the higher the transmission frequency of RTS packets, and the faster of the

system recovers from an interruption or conflict. However, more bandwidths are used, which affects the

throughput of other network data packets.

The value ranges from 1 bytes to 2346 bytes, and the default value is 2346 bytes.

Fragmentation Threshold Indicates the fragment threshold. When the size of a packet is greater than this threshold, the packet will be

fragmented. If the transmission of fragments is interrupted, only the parts that are not successfully transmitted

need to be retransmitted.

The value ranges from 256 bytes to 2346 bytes, and the default value is 2346 bytes.

Parent Topic: WLAN

< Previous topic Next topic >

1.6.7.7 Automatic WiFi Shutdown

1. Click the Advanced Configuration > WLAN tab, and choose Automatic WiFi Shutdown from the navigation tree on the left. In the right

pane, configure the scheduled WiFi shutdown time segment, to enable the WiFi network to be automatically shut down when the WiFi

network is not in use, as shown in Figure 1.

Figure 1 Automatic WiFi Shutdown

2. Click Apply.

Parent Topic: WLAN

< Previous topic Next topic >

1.6.7.8 WiFi Coverage Management

1. Click the Advanced Configuration > WLAN tab, and choose WiFi Coverage Management from the navigation tree on the left. In the

right pane, specify the SSID used for smart WiFi coverage and add the identified external AP devices to the WiFi network, as shown in Figure

1 and Figure 2.

Loading ...

Huawei HG8145V5 Terminal Router