Huawei HG8145V5 Terminal Router

User Guide - Page 59

For HG8145V5. Also, The document are for others Huawei models: HG8245H5, HG8247H5, HG8240T5, HG8141A5

PDF File Manual, 86 pages, Read Online | Download pdf file

HG8145V5 photo
Loading ...
Loading ...
Loading ...
1/13/2020 HedEx Startpage
localhost:7890/printtopics.html?time=Mon Jan 13 2020 13:54:48 GMT+0100 (Central European Standard Time) 59/86
Parameter Description
Authentication Mode Indicates the authentication mode for the STA to request access to the wireless network. The mode can be Open,
Shared, WPA Pre-Shared Key, WPA2 Pre-Shared Key, WPA/WPA2 Pre-Shared Key, WPA Enterprise, WPA2
Enterprise, or PA/WPA2 Enterprise.
It is set to open by default, that is, the STA can access the network without authentication.
Encryption Mode Indicates the encryption mode for the STA to request access to the wireless network. The encryption mode and
encryption parameters vary with the authentication mode.
If the authentication mode is set to Open, the encryption mode can be set to None or WEP.
If the authentication mode is set to Shared, the encryption is WEP.
If the authentication mode is set to WPA Pre-Shared Key, WPA2 Pre-Shared Key, WPA/WPA2
Pre-Shared Key, WPA Enterprise, WPA2 Enterprise or WPA/WPA2 Enterprise, the encryption
mode can be set to AES, TKIP, or TKIP&AES.
NOTE:
The security mode and encryption configured on a Wi-Fi terminal must be the same as those of an ONT. If the TKIP&AES, or AES encryption mode is not configured on
the Wi-Fi terminal, the Wi-Fi terminal may have an old-version driver. If so, update the driver version.
When two SSIDs are configured, if you modify the information of an SSID, the other SSID will re-choose a channel, causing the service to be interrupted for a few
minutes.
The WPS function can be used on SSID1 for only one band. In addition, do not enable WPS for multiple SSIDs in the same band. Otherwise, a Wi-Fi connection
abnormality may occur.
Parent Topic: WLAN
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >
1.6.7.6 5G Advanced Network Settings
NOTE:
Only dual-band products support this page.
1. Click the Advanced Configuration > WLAN tab, and choose 5G Advanced Network Settings from the navigation tree on the left. In the
right pane, configure the basic parameters of the 5G Wi-Fi network, as shown in Figure 1.
NOTE:
This page is empty if Enable WLAN is not selected in 5G Basic Network Settings.
Figure 1 5G Advanced Network Settings
2. Click Apply.
Table 1 describes the Wi-Fi parameters of the 5G Wi-Fi network.
Table 1 Wireless network advance parameters
Loading ...
Loading ...
Loading ...