Huawei HG8145V5 User Guide

Loading ...

1/13/2020 HedEx Startpage

localhost:7890/printtopics.html?time=Mon Jan 13 2020 13:54:48 GMT+0100 (Central European Standard Time) 17/86

Parameter Description

Multicast VLAN ID The multicast VLAN ID ranges from 1 to 4094.

The multicast VLAN ID must be the same as the multicast VLAN ID on the OLT.

NOTE:

WAN in route mode: The ONT functions as a gateway. The IP address of the ONT can be obtained through DHCP, Static, or PPPoE. The IP address of the PC connected to

the ONT can be obtained from the DHCP address pool of the ONT or can be set manually.

WAN in bridge mode: The ONT functions as a relay and does not process data. The ONT does not obtain the IP address allocated by the upper-layer device and it does not

allow manual configuration of a static IP address. The IP address of the device connected to the ONT can be obtained through DHCP, PPPoE, or static.

In the case of the DHCP mode, you need to set the DHCP relay. After configuration is complete, the user-side IP address is obtained from the upper-layer device. For the

detailed procedure, see DHCP Server Configuration.

In the case of the PPPoE mode, the user-side IP address is obtained through PPPoE authentication of the upper-layer device.

Parent Topic: WAN Configuration

1.6.2 LAN Configuration

This topic describes how to configure the LAN port or DHCP Parameters through the Web page.

Layer 2/3 Port Configuration

LAN Host Configuration

DHCP Server Configuration

DHCP Static IP Configuration

DHCPv6 Server Configuration

DHCPv6 Static IP Configuration

DHCPv6 Information

Port Locating

Parent Topic: Advanced Configuration

< Previous topic Next topic >

1.6.2.1 Layer 2/3 Port Configuration

1. In the navigation tree on the left, choose Advanced Configuration > LAN Configuration > Layer 2/3 Port Configuration. In the pane on

the right, determine whether the LAN port works in layer 3 mode, as shown in Figure 1.

Figure 1 Layer 2/3 Port Configuration

NOTE:

If the check box corresponding to the LAN port is selected, it indicates that the LAN port works in layer 3 mode, that is, the gateway mode; if the check box

corresponding to the LAN port is deselected, it indicates that the LAN port works in layer 2 mode, that is, the bridge mode.

By default, the check boxes corresponding to all LAN ports are deselected, that is, all LAN ports work in layer 2 mode.

2. Click Apply.

Parent Topic: LAN Configuration

Next topic >

1.6.2.2 LAN Host Configuration

1. In the navigation tree on the left, choose Advanced Configuration > LAN Configuration > LAN Host Configuration. In the pane on the

right, set the management IP address of Primmary Address and Secondary Address, as shown in Figure 1.

Loading ...

Huawei HG8145V5 Terminal Router

User Guide - Page 17