Huawei HG8145V5 User Guide

Loading ...

1/13/2020 HedEx Startpage

localhost:7890/printtopics.html?time=Mon Jan 13 2020 13:54:48 GMT+0100 (Central European Standard Time) 34/86

2. Click Apply.

Parent Topic: Route

< Previous topic Next topic >

1.6.4.6 IPv4 Routing Table

Click the Advanced Configuration > Route tab, and choose IPv4 Routing Table from the navigation tree on the left. In the right pane, routing

information of the device is displayed, including the destination IP address, destination subnet mask, gateway, and outgoing interface, as shown in

Figure 1.

Figure 1 IPv4 Routing table

Parent Topic: Route

< Previous topic Next topic >

1.6.4.7 Default IPv6 Route Configuration

1. In the navigation tree on the left, choose Advanced Configuration > Route > Default IPv6 Route Configuration. In the pane on the right,

select or deselect the Enable the Default Route option button to enable or disable the default route of the system, as shown in Figure 1.

Figure 1 Default IPv6 Route Configuration

NOTE:

If an ONT fails to find a matching routing entry after receiving a packet, the WAN interface specified by the default route configuration sends the packet to a network

device. Before the default route of the system is enabled, the WAN interface must obtain the IP address. Therefore, the parameters of the WAN interface must be

correctly set. For details, see WAN Configuration.

2. Click Apply.

Parent Topic: Route

< Previous topic Next topic >

1.6.4.8 IPv6 Static Route Configuration

1. In the navigation tree on the left, choose Advanced Configuration > Route > IPv6 Static Route Configuration. In the pane on the right,

click New. In the dialog box that is displayed, set the parameters related to the static route, as shown in Figure 1.

Loading ...

Huawei HG8145V5 Terminal Router

User Guide - Page 34