Loading ...
Loading ...
Loading ...
1/13/2020 HedEx Startpage
localhost:7890/printtopics.html?time=Mon Jan 13 2020 13:54:48 GMT+0100 (Central European Standard Time) 52/86
Figure 1 WLAN Basic Configuration
2. Click Apply.
Table 1 describes the basic parameters of the Wi-Fi network.
Table 1 Basic wireless network configurations
Parameter Description
Enable WLAN Indicates whether to enable the wireless network. The following parameters can be set only when the wireless
network is enabled.
SSID Name Indicates the name of the wireless network. It is used to differentiate different wireless networks. It consists of a
maximum of 32 characters, without Tab character. A default SSID1, named WirelessNet is created after the
creation of an ONT. The system can configure up to four SSIDs at a time and cannot assign IP addresses to Wi-Fi
terminals by SSID.
Enable SSID Specifies whether to enable the connection.
Associated Device Number Specifies the number of STAs. It ranges from 1 to 32.
Broadcast SSID Indicates whether to enable or hide broadcast.
If the option box is selected, it indicates that the SSID broadcast function is enabled. The ONT
periodically broadcasts the SSID, that is, the name of the wireless network. In this way, any STA can
search for the wireless network.
If the option box is not selected, it indicates that the SSID broadcast function is disabled. The SSID is
hidden, and the STA cannot search for the wireless network. The SSID can be obtained only through a
request.
WMM Enable Specifies whether to enable Wi-Fi multimedia.
Loading ...
Loading ...
Loading ...