Loading ...
Loading ...
Loading ...
1/13/2020 HedEx Startpage
localhost:7890/printtopics.html?time=Mon Jan 13 2020 13:54:48 GMT+0100 (Central European Standard Time) 38/86
Parameter Description
Table 1 describes the parameters related to IPv4 port mapping.
Table 1 Parameters related to IPv4 port mapping
Parameter Description
Enable Port Mapping Indicates whether to enable port mapping.
Mapping Name Indicates the name of the port mapping rule.
WAN Name Indicates the name of the WAN interface where port mapping is enabled.
Internal Host Indicates the IP address of the host to which the port is mapped.
Protocol Indicates the protocol type of port mapping packet, which may be TCP, UDP, or TCP/UDP.
Start External Port Indicates the destination start port of the external data packet.
End External Port: Indicates the destination end port of the external data packet.
Start Internal Port Indicates the internal destination start port of the port mapping packet.
End Internal Port Indicates the internal destination end port of the port mapping packet.
Start External Source Port Indicates the source start port of the external data packet.
End External Source Port Indicates the source end port of the external data packet.
External Source IP Address Indicates the source IP address of the external data packet.
Parent Topic: Forward Rules
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >
1.6.5.3 Port Trigger Configuration
1. Click Advanced Configuration > Forward Rules tab, and choose Port Trigger Configuration. In the pane on the right, click New. In the
dialog box that is displayed, set the parameters related to the port trigger, as shown in Figure 1.
Loading ...
Loading ...
Loading ...