Loading ...
Loading ...
Loading ...
1/13/2020 HedEx Startpage
localhost:7890/printtopics.html?time=Mon Jan 13 2020 13:54:48 GMT+0100 (Central European Standard Time) 65/86
Figure 4 User basic parameters-H.248 protocol
2. Click Apply.
Table 2 describes parameters used for configuring a VoIP interface based on the H.248 protocol.
Table 2 Parameters used for configuring a VoIP interface based on the H.248 protocol
Parameter Description
Basic Interface Parameters(H.248)
Address of the Primary MGC Indicates the IP address (provided by the ISP) of the primary MGC server.
Port of the Primary MGC Indicates the ID (provided by the ISP) of the port used for communication between the primary
MGC server and the VoIP terminal. The ID ranges from 1 to 65535 and the default ID is 2944.
Address of the Standby MGC Indicates the IP address (provided by the ISP) of the secondary MGC server.
Port of the Standby MGC Indicates the ID (provided by the ISP) of the port used for communication between the
secondary MGC server and the VoIP terminal. The ID ranges from 1 to 65535 and the default
ID is 2944.
MG Domain Fill the domain name when MID Format is set to Domain Name, such as user.huawei.com.
MG Port Indicates the ID of the local port on the ONT. The ID ranges from 1 to 65535 and the default ID
is 2944.
Device Name Fill the device name when MID Format is set to Device Name.
MID Format Indicates the MG registration format. It can be the MG domain name, IP address, or device
name. The MG register format must be the same as the register format provided by the ISP.
Digitmap Matching Mode
Indicates the digitmap matching mode, including Min and Max.
Min: If the dialed character string matches a digitmap scheme, the system immediately
reports the number to the softswitches.
Max: If the dialed character string matches a digitmap scheme, the system does not
immediately report the number to the softswitches but starts the short timer. If a user
does not continue dialing digits, the system reports the number to the softswitches
after the short timer times out; if the user continues dialing digits and the number
matches the long digitmap, the system reports the number that matches the digitmap to
the softswitches.
Enable Digitmap Auto-match Enables or disables the function of digitmap auto match.
RTP TID Prefix Indicates the index of the ephemeral termination. The default prefix on Huawei softswitches is
A100.
Start Number of RTP TID Indicates the start number of RTP TID. The default start number is 0.
Width of RTP TID Number Indicates the width of RTP TID. The default number is 6.
Signaling Port Indicates the signaling WAN port used for connecting the VoIP terminal to the MGC server.
Media Port Indicates the WAN port of the voice media streams. When the name of the media port is empty,
it indicates that the name of the media port is the same as that of the signaling port.
Region Indicates the country code.
Basic User Parameters(H.248)
Enable Physical TID Enables or disables an ONT POTS port.
Physical TID Indicates the POTS port identifier.
Associated POTS Port Indicates the binding of a POTS port and a physical terminal.
Parent Topic: Voice
Loading ...
Loading ...
Loading ...