Loading ...
Loading ...
Loading ...
4.2.5 END-OF-DEFROSTING THERMOSTAT REPLACING
Remove the evaporator cover (8) and the
back metal cover in the rear side of the
cabinet, as already explained at paragraph
2.3 and 2.5. On the back of the cabinet find
and disconnect the two-way junction
connecting the fixed thermostat as par fig.
42; remove the terminals from the junction,
proceeding as already explained in the
paragraph 4.1.1 in fig. 26, and pull the two
black cables inside the inner tank. Remove
the thermostat from the evaporator acting
with a pair of pliers as shown in fig. 43.
Extract the thermostat wires from their
sheath and introduce the new ones. During
the installation the new thermostat on the
evaporator, it is recommended to place it in
the position shown in fig. 43, by pressing on
the fixing spring until the spring itself has
hooked the pipe and complete the operation
by rotating the thermostat around its
connection point, until the concave part,
marked with an arrow in fig. 44, is rested on
the pipe.
FIG. 43
FIG. 42
FIG. 44
- 28 -
Loading ...
Loading ...
Loading ...