Loading ...
Loading ...
Loading ...
4.2.2 EVAPORATOR MOTOR FAN REPLACING
Remove the evaporator cover (8) and the back metal cover in the rear side of the cabinet,
as already explained at paragraph 2.3 and 2.5. Disconnect the terminal junction of the
motor fan located in the back side, as indicated in fig. 35, and extract the terminals,
proceeding as already explained in the paragraph 4.1.1 in fig. 26. Remove the insulating
mastic highlighted in fig. 35 and pull the wires inside the tank; remove the aluminium blade
(38) by unscrewing the hexagonal screw marked with "2" in fig. 38 and then loosen the 4
screws indicated with "1" in fig. 38 and 39, in order to disconnect the motor fan support.
FIG. 33
FIG. 34
FIG. 35
FIG. 36
FIG. 37
- 26 -
FIG. 38
FIG. 39
Loading ...
Loading ...
Loading ...